Dissertation > Excellent graduate degree dissertation topics show

The Mechanism Research and Simulation Analysis on Electromagnetic Ultrasonic Guided Wave in Metal Plate

Author: GaoWenPing
Tutor: GaoSongWei
School: Shenyang University of Technology
Course: Measuring Technology and Instruments
Keywords: Ultrasonic guided wave Electromagnetic ultrasonic transducer Bias magnetic field Eddy Lorentz force ANSYS finite element analysis
CLC: TH878.2
Type: Master's thesis
Year: 2011
Downloads: 187
Quote: 1
Read: Download Dissertation

Abstract


Ultrasonic guided wave detection technology in recent years the rise of a new non-destructive testing methods , this detection technique is applicable to a very wide range , can be used to detect plate , pipe, bar and bending deformation of the workpiece . This detection technique has a detection speed , the detection distance and detection of a wide range of advantages, but it can be a point to get a guided wave excitation line defect situation, so this detection method is to save testing time , making detection the efficiency is greatly improved the paper studied the ultrasonic guided wave formation in the principle, conditions, and propagation characteristics of electromagnetic ultrasonic guided waves and conducted in-depth research , deduced the process of electromagnetic ultrasonic transducers complete equations and boundary conditions . Through the electromagnetic ultrasonic transducer coils and permanent magnets study devised an effective electromagnetic ultrasonic guided waves for generating an electromagnetic transducer model and apply it to the paper simulation . Using ANSYS finite element software under the horizontal and vertical magnetic field, the magnetic field of electromagnetic ultrasonic guided waves four processes were simulated. Mainly the bias magnetic field of electromagnetic ultrasonic , eddy current , Lorentz force and electromagnetic ultrasonic guided waves to study the electromagnetic simulation ultrasonic guided wave propagation visualization . The simulation shows that the electromagnetic ultrasonic meaningful portion of the magnetic field strength of the magnetic field is very small ; coil beneath the eddy current and the maximum Lorentz force , and the swirl direction opposite to the excitation current frequency . Through all the particle displacement at a time variation and individual variation with time particle displacement can visually see the electromagnetic ultrasonic guided waves in a very short time, the rapid decay . In the vertical magnetic field of the electromagnetic guided wave simulation , through the study coil spacing, distance and frequency of the coil off the thick plot of the conversion efficiency , proposed three improved transducer efficiency. Through the horizontal magnetic field and the vertical magnetic field simulation of electromagnetic ultrasonic guided wave comparison , obtained under the same conditions of the horizontal magnetic field parameters of the electromagnetic ultrasonic transducer conclusion higher conversion efficiency .

Related Dissertations

  1. The Characteristics Research of a Bulk Ship Cabin Fire,U698.4
  2. Study on Nanocrystalline FeCuNbSiB Alloy Powder and Magnetic Powder Cores,TB383.1
  3. The Demagnetization Analysis of Direct-Driven Permanent-Magnet Synchronous Generator in the Wind Power Generation System,TM315
  4. Permanent magnet synchronous motor for electric vehicle design and key technology research,TM341
  5. Large Power Transformers dimensional leakage magnetic field and thermal field coupling analysis,TM411.1
  6. Large transformer eddy current loss and the body vibration calculation and analysis,TM41
  7. Belt conveyor with direct-drive permanent magnet external rotor motor research,TM351
  8. Thermal conductivity of the power module,TN386
  9. No leakage electric pump Loss Analysis and axial force balance new method for research,TH38
  10. Reinforced concrete structures interfacial debonding damage ultrasonic guided wave detection technology,TU375
  11. Research on Key Technologies for Planar Eddy Sensor,TP212
  12. Analysis and Experimental Research for High Speed Motorized Spindle Thermal Properties,TH133.2
  13. Preliminary Study of Nutrients in Yellow Sea and the East China Sea and the Cold Eddy Northeast of Taiwan,P734.2
  14. Large Eddy Simulation of Urban Heat Island and Pollutant Diffusion,X16
  15. Turbine flow numerical simulation of fluid-structure coupling vibration,O353.4
  16. Numerical Modeling on the Temperature Field and Heat Stress Field in the Process of Foundry Freezing,O343.6
  17. Numerical Simulation of the Flow Line of SCR and Seafloor Interaction,TE952
  18. The Structural Design and Experimental Research on Kilometer Pitch Carbon Fiber Roll-up System,TQ342.742
  19. Research on Design Technique of An 80T Pulsed High Field Magnet,TM53
  20. Design and Research of Automatic Coin Sorting Machine with Distinguish Function,TB486
  21. Modeling and Research of EMAT Based on Lorentz Mechanism,TB552

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > Material testing machine and test equipment > Nondestructive flaw detector > Ultrasonic flaw detector
© 2012 www.DissertationTopic.Net  Mobile