Dissertation > Excellent graduate degree dissertation topics show

Research of Impinging Cooling Technology for Disk Laser Crystal

Author: ChenPeng
Tutor: ZhuChangHong
School: Huazhong University of Science and Technology
Course: Physical Electronics
Keywords: High power Disc laser crystal Impinging cooling Cooling finger Array
CLC: TN244
Type: Master's thesis
Year: 2011
Downloads: 44
Quote: 1
Read: Download Dissertation

Abstract


The thin disc laser allows the realization of lasers with high output power, highest efficiency and good beam quality, simultaneously. Yb:YAG is chosen as the preferred laser material because it primarily has a high quantum efficiency, guarantees good energy storage for pulsed operation, and exhibits a broad absorption line at 941nm for easy and effective pumping with InGaAs diodes. Yb:YAG being a quasi three level system is sensitive to temperature. If the temperature of disc laser crystal increased, disc laser’s output threshold will increase, slope efficiency will reduce and output beam quality will turn worse. So, effective cooling system must be designed for disc laser crystal.This thesis firstly introduces the relevant principles of heat transfer and fluid dynamics. Then make a simple introduce of FLUENT and the experimental test platform. Before analyze the heat transfer character we demarcated the experimental test platform’s heat flax.The heat transfer character of single jet module is studied by simulations and experiments in this thesis. Through analyze the heat transfer character at different impinging distances and different injection velocities, we can find that cooling system has bigger heat transfer capability when improve injection velocity and decrease impinging distance. Single jet module does not suitable for disc laser crystal cooling because of it can not improve injection velocity and injection area simultaneously.Jets array module’s heat transfer character is analyzed. The peak values of heat transfer coefficient are nearly the same at different impinging distances. When the impinging distance is 5mm, the peak value of heat transfer coefficient is about 75000WK-1m-2. The maximum heat transfer coefficient will increas to 147000WK-1m-2 if the injection velocity is doubled. At the same pressure pipe jets array module can provide a lager injection velocity but smaller turbulivity than jets array module. The experiments and simulations results show that jets array module can achieve lager heat transfer coefficient than pipe jets array at the same boundary conditions.Overall, jets array module is suitable for disc laser crystal end-cooling.

Related Dissertations

  1. Sound source directional mobile robot Methods,TP242
  2. Growth of Single-walled Carbon Nanotube Arrays and the Study of Their Adhesion Force,TB383.1
  3. SAW gas sensor array pattern recognition technology research,TP212
  4. Second-order Circulation Statistics-based Array Signal Processing,TN911.7
  5. Study, Implementation and Application of Adaptation Technologies in IP Over WDM,TN929.1
  6. The Research and Design of Phase Conjugation Mixer in Retro-directive Array,TN773
  7. Implementation of DFT Based on First-order Moments Using FPGA,TN911.72
  8. Indoor Wireless Visible Light Communication System Based on Quadrature Amplitude Modulation,TN929.1
  9. Study on Acoustic Localization Method Based on Microphone Array of Mobile Robot,TP242
  10. Research and Manufacture of Second-Order Grating Distributed Feedback Semiconductor Lasers,TN248.4
  11. Research on Anti-corrosion of Water System of Gas Processing Facility,TE983
  12. Dual controller disk array data synchronization channel high-speed transmission technology research,TP333.35
  13. Minicomputer contains three-dimensional imaging laser radar system is a key technology research,TN958.98
  14. PC-based fiber optic monitoring system research and design,TN929.1
  15. Research of Image Interpolation Algorithm,TP391.41
  16. Custom features graphic modeling research and application,TP311.52
  17. Design of Signal Acquisition System Base on Small Pixel X-RAY Liner Array Detector Card,TP274.2
  18. Research on Real-time Acquisition and Processing Method of Tactile Information of Intelligent Robot Sensing Suit,TP274.2
  19. The Design and Implementation of Area Array CCD Image Acquisition and Processing System,TP274.2
  20. USB2.0 device controller design,TP336
  21. OMAP3530 -based microphone array life detector design and implementation,TN912.2

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser > Laser materials and substances
© 2012 www.DissertationTopic.Net  Mobile