Dissertation > Excellent graduate degree dissertation topics show

Research on Mechanical Properties of 304 Stainless Steel by Selective Laser Melting

Author: XiaoFei
Tutor: WangZeMin
School: Huazhong University of Science and Technology
Course: Physical Electronics
Keywords: Selective laser melting Process parameters Mechanical properties Microstructure
CLC: TN249
Type: Master's thesis
Year: 2011
Downloads: 78
Quote: 0
Read: Download Dissertation

Abstract


Selective Laser Melting (SLM) is a kind of manufacturing method that builds whole metal parts layer by layer, which can fabricate the terminal metal productions directly and easily. It has great practical value and potential applications in the areas of biomedical and aerospace. Because the research term of SLM technology is short and the report on mechanical performance is rarely, which retards the engineering applications.In this thesis, the effects of the main parameters, such as layer thickness, overlapping rate, phase position angle, tilt angle, laser power and scanning speed, on the mechanical properties of parts by SLM has been studied. The results show that layer thickness and overlapping ratio have almost no influence on mechanical properties of parts when the laser energy density is high enough. When other parameters are fixed, the mechanical property of parts at the phase position angle of 105°is the best. Especially, the tensile strength of the built parts increases with laser power and laser scanning speeds before stabilization when other parameters are fixed. The mechanical property of parts has high tensile strength and low Elongation in vertical direction. Overall, the mechanical property of parts by SLM is equivalent or higher than that of forging.The microstructure of parts formed by SLM show that parts is homogeneous with good lap between the scan lines and cladding layers. The microhardness of the parts by SLM is uniform in the XOZ and the XOY planes ranging from HV 240 to 270. Finally, the fracture of the parts presents a typical ductile fracture with uniform and small-size circular dimples.

Related Dissertations

  1. Optimization Study on Gating System and Molding Process Parameters of Injection Mold Based on Simulation,TQ320.662
  2. Optimization Study on Injection Product Warpage Based on ANN (Artificial Neural Network),TQ320.66
  3. Fixed Buckle Injection Mold CAD/CAE Technology Application Research,TQ320.66
  4. Advanced reactor candidate materials for micro- structural analysis,TL341
  5. Nuclear related materials mechanical properties and microstructure analysis,TL341
  6. 2205 duplex stainless steel plate TMCP technology research,TG335.5
  7. Trace elements on Mg-Al-Zn -based alloy microstructure and properties of,TG146.22
  8. Improving on Technology for SLS Rapid Prototyping,TF124.5
  9. Study on Microstructure and Properties of Copper Alloy Mould of Horizontal Continuous Caster,TF341.6
  10. Low-temperature sintering 8YSZ microstructure and mechanical properties of,TF046.4
  11. Research on Compressive Strength and Reinforcement Mechanism of the Fly Ash Blended with Solidified Agent,X773
  12. Study on Mechanical Properties of Transmission Tower-Line System in Different Iced Conditions by FEM,TM753
  13. Modeling of Microstructure Nonlinear Dynamics of Financial Market and Numerical Simulation Based on State Space Method,O211.62
  14. Research in the Physical Features of Adjustable Micro-Strured Fiber Bragg Grating,TN253
  15. Mechanical Property Control of Polyacrylamide Gel Application for Cell Culture in Vitro,Q813
  16. The Study of Preparation Electrochemical Properties and Surface Modification of Boron-doped Diamond Thin Film,TB383.2
  17. POSS silicon insulating material formulations and application of exploration and research,V259
  18. Multi-directional forging heat treatment on microstructure and properties of 7A04 aluminum impact,TG319
  19. Strain hardening austenitic stainless steel 022Cr17Ni12Mo2 low cycle fatigue properties of,TG115.57
  20. Based on virtual manufacturing sheet metal forming simulation technology,TP391.9
  21. The Effect of Direct Electric Resistance Heat Treatment on the Mechanical Properties of Orthodontic NiTi Archwires,R783.5

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser > Laser applications
© 2012 www.DissertationTopic.Net  Mobile