Dissertation > Excellent graduate degree dissertation topics show

The Key Problem’s Research on V-Process’ Efficiency for Small-Medium Steel Castings

Author: LvShengHai
Tutor: YeShengPing
School: Huazhong University of Science and Technology
Course: Materials Processing Engineering
Keywords: V-process casting small-medium casting composition of sodium silicatebonded sand and V-process no coating of V-process carton pickup
CLC: TG260
Type: Master's thesis
Year: 2010
Downloads: 32
Quote: 0
Read: Download Dissertation

Abstract


V-process casting is widely used on the spare parts production of locomotiveload-carrying vehicle and construction machinery. Small-medium steel castings areproduced by V-process casting, which has advantage of high dimensional accuracy andfine surface quality. However, the problem of low productivity and relying on vacuumrestricts the further development of small-medium V-process steel castings.Based on the theory and technology of V-process casting and sodium silicate bondedsand casting, this paper does some research and experiment of carrying-saddles, producedby Zhuzhou Kemeng vehicle parts Co., Ltd., which improves the production efficiency.This paper does research of horizontal molding horizontal casting and horizontal moldingvertical casting. HZCAE is used for optimizing the process of horizontal molding verticaland collude casting, which improves production efficiency and production yield. Based onthe success of no coating V-process on aluminum castings, this paper tries no coatingV-process on steel castings, which can reduces operating procedure and improvesproduction efficiency.In order to improve the efficiency of vacuum and the quality of casting surface, thispaper tries compound molding of sodium silicate bonded sand and V-process. Layeringflask ensures the process of air pumping and CO2 blowing, which ensures casting formingnormally and improves the molding efficiency. Carton pickup on two sides of steel board’ssurface, produced by Luoyang Gangfeng Foundry Co., Ltd., affects its lifetime and serviceefficiency, on which the experiment of no coating and ultra film V-process can prove theeffect of coating.

Related Dissertations

  1. Solidification Simulating Technology Used in the Pruoduction of the Plate Casting,TG244.3
  2. Furan the the sand resin production YBL220 imprint body casting technology,TG255
  3. Riser optimization design for engineering CAD systems research and development,TG248
  4. Nano- doped Al_2O_3 13wt% TiO_2 plasma sprayed ceramic coatings and applied research,TQ633
  5. The Preparation of SiC by Precursor Infiltration Pyrolysis and the Influence of SiC on the Improperty of C-Materials,TB304
  6. Research on Nano-Al2O3/Ni-P Composite Coating,TB383.1
  7. Studies on Processing Technology of Male-sterile Flue-cured Tobacco Seed & Storage Technology of Primed Pelleted Flue-cured Tobacco Seed,S572
  8. Research on Electroplating of Stainless Steel by Aluminum from Non-aqueous and AAO Template Fabricated by Aluminum Coating,TG174.44
  9. Experimentation and Simulation Research of Deep Drawing Process of Metal Sheet with Coating,TG386
  10. Several Ladles Pouring Together for Large Super-low-carbon Stainless Steel Casting,TG260
  11. Optimal Riser Design of Steel Casting Based on CAE Analysis,TG260
  12. Automatic Optimal Riser Design System of Steel Casting Using Genetic Algorithm,TG260
  13. Optimal Riser Design of Steel Casting Based on Isolated Liquid Region,TG260
  14. Large steel castings solidification process parameters optimization of numerical simulation,TG260
  15. Research on Calculating Model and Software for Insulating Riser of Large Steel Castings,TG260
  16. Optimizing and Validating on Casting Process of Alloy Steel Valve Body,TG260
  17. Typical Steel Casting Technologyanalysis and Improvement Based on Numerical Simulation,TG260
  18. The Formation Mechanism and Preventing Methods of Hot Tears in the Thin-Wall Steel Castings with Furan Nobake Resin Sand,TG260
  19. Research and Development on the 3D Casting Process CAD System Based on UG,TG260
  20. Simulation and Processing Optimization of Large Steel Castings,TG260
  21. Cast steel ester cured process,TG260
  22. Influence of Metallurgy Quality on Impact Toughness of Low Temperature Cast Steel,TG260

CLC: > Industrial Technology > Metallurgy and Metal Craft > Casting > Steel Casting > General issues
© 2012 www.DissertationTopic.Net  Mobile