Dissertation > Excellent graduate degree dissertation topics show

Design of Tieluoping Bridge Data Acquisition and Processing System

Author: CuiXingBin
Tutor: ChenKeShan
School: Beijing Jiaotong University
Course: Mechanical and Electronic Engineering
Keywords: Bridge health monitoring synchronous data acquisition distribute Virtual Instrument modal parameter
CLC: TP274.2
Type: Master's thesis
Year: 2011
Downloads: 50
Quote: 0
Read: Download Dissertation

Abstract


This paper builds up bridge HMS (health monitoring system) with PXI bus Virtual Instrument for the west Shanghai-Chengdu expressway bridge. This system mainly includes two aspects of work:Data acquisition hardware platform and data processing software platform. This system cans real-time on-line monitoring bridge state. the data and processing results can be used for bridge condition assessment.Firstly, Tieluoping bridge was chosen and arranged sensors according to the needs of bridge monitoring project. Then designed based collection station with PXI bus virtual instrument, set one collection stations near two towers of the bridge, and the distributed data acquisition system can Real-time collection and transmission 129 different sensor signal. Bridge vibration signal can reflect inherent frequency of the bridge, and all channels require collection synchronization. This paper design synchronal collection module based on GPS time signal.In this paper the design of software can be divided into acquisition station software design processes and monitoring center procedures, Acquisition station contained data acquisition module and data transmission module. It mainly designs synchronization data collection module with DAQmx, and data transmission module with Datasocket. The monitoring center mainly contained data real-time display module, data processing module and data storage module. Design The Interface for data display and warning with LabVIEW language, preparation before the real time monitoring of data collection, realize the interface and collection of real-time monitoring station state and early warning; Data processing module mainly design filter and wavelet filter, and analysis data in time domain and frequency domain in order to reflects the development tendency of the bridge; This paper design data storage module with Oracle database, mainly contains storage and query data.Finally it had analysis how to use auto-power spectrum and cross-power spectrum recognition bridge Modal Parameters. It designs bridge vibration data processing system with LabVIEW language. Through the analysis of simple beam data and bridge data, the system analysis results are correct and reliable.

Related Dissertations

  1. Research on Synchronous Acquisition and Processing System Detecting Defocus Signal Based on DSP,TH741
  2. Study of Automobile Ignition Coil Testing System Based on Standard LAH032.905,U472.9
  3. Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
  4. CAN bus technology in the meteorological monitoring System Research and Implementation,P409
  5. Sliding Mode Control and Stability for Distributed Parameeter System with Multiple Time-delays,O231
  6. Small aperture glass-ceramics based on helium-neon laser fundamental transverse mode selected experimental study,TN248
  7. Gunships simulation cockpit system design and implementation,V216.8
  8. Application Based on Mode Analysis and Signal Processing in Bridge Detection,TN911.7
  9. Research of Rutting Test Data Acquisition System Based on Vritual Instrument,U414
  10. Missing Data Imputation in Bridge Health Monitoring System Base on Hybrid Model of SARIMA and Neural Network,TP183
  11. Research on Virtual Part Dimention Measurement System Based on Embedded Technology,TP274
  12. Federal members of the development of a fire control radar echoes based on HLA,TN958
  13. Development of Measurement System for Charge Carrier Mobility Based on Virtual Instrument,TN304
  14. The Application of Localization by Positive and Negative Pressure Wave in the Block-detection of Buried Pipeline,TE973.6
  15. Design and Realization of Launcher Integrated Test System Based on DSP and FPGA,TJ06
  16. Based on Virtual Instrument signal acquisition and control system development,V216.8
  17. Experimental Study of the Structural Modal Parameter Identification Under Sound Excitation,V216.21
  18. The Dynamic Friction Moment Gathering System Applied to Failure Diagnosis of Sensitive Bearings,TP274.2
  19. Study on Mode Synthesis of Diesel Engine Crank-shaft Mechanism,TK423.3
  20. Researching the Method of Measuring Satisfaction Degree in Distribution Channel,F274
  21. Research of Monitoring System of Wind-Photovoltaic System,TM76

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Data collection and processing systems
© 2012 www.DissertationTopic.Net  Mobile