Dissertation > Excellent graduate degree dissertation topics show

Research on a Water-lubricated Radial Journal Bearing Test-Bed

Author: LiuLiPing
Tutor: TangQunGuo
School: Huazhong University of Science and Technology
Course: Mechanical and Electronic Engineering
Keywords: Water-lubrication Journal bearing Hydrodynamic lubrication Hydrostatic lubrication Test-bed Simulation analysis
CLC: TH133.31
Type: Master's thesis
Year: 2011
Downloads: 173
Quote: 0
Read: Download Dissertation

Abstract


Radial journal bearings are key components in the pure water-lubricated hydraulic pump and motor. Its structures and performance parameters have substantial influence on the capability, reliability and service life of the hydraulic pump and motor. Based on the working environment and operating conditions of the hydraulic pump and motor, establishing and perfecting the design theory of the water-lubricated journal bearing is of great importance for the development of water hydraulic power transmission technology. As a result, the research on the water-lubricated radial journal bearing test-bed is becoming an urgent problem to be solved.A water-lubricated radial journal bearing test-bed is introduced in this paper. It is composed by a mechanical system, a hydraulic system and a signal testing system. The mechanical system consists of a housing block, a shaft, the journal bearing to be tested, a bearing bracket, a loading cylinder, etc. The hydraulic system can be divided into a lubrication system and a loading system, both of which are powered by the same water hydraulic pump. With corresponding adjustment of the hydraulic system, it can achieve either hydrodynamic or hydrostatic lubrication. The signal testing system is a data collecting and processing system based on the software LabVIEW. It can dynamically or statically real-time display the performance parameters of the journal bearing.In order to probe into the flow field of the water-lubricated radial journal bearing, based on the fundamental theories of the hydrostatic and hydrodynamic lubrication, this paper respectively researches on the flow field simulation of the hydrostatic and hydrodynamic journal bearing. The laws that load carrying capacity changes with eccentricity and supplying hydraulic pressure under hydrostatic condition have been obtained. The rules that water film pressure, water film rigidity, load carrying capacity, angle of displacement changes with eccentricity under hydrodynamic condition have also been acquired, which can provide theory referrence and support for the journal bearing test research.Experiments on the hydrostatic radial journal bearing are carried out on the test-bed. The rules that the friction torque, eccentricity, angle of displacement and water film change with time have been obtained, which can provide experimental reference for perfecting the radial journal bearing theory.

Related Dissertations

  1. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  2. The Research of Complex Surface Numerical Value Simulation and Polishing Technology.,TG580.692
  3. Experimental Verification of Underwater Mobile Sensing Network,P229
  4. Research of Grey Theory on Long—Span Bridge Construction Monitoring,U445.4
  5. Study on Some Problems in Gemel Arch Grouting Ofthe High Arch Dam for Impoundment and Power Generation in Advance,TV642.4
  6. Structural Reliability Analysis and Experimental Verification on Foam Cored Sandwich Panel,TB30
  7. Simulation Analysis of Semi-Active Suspension Based on Fuzzy Control,U463.33
  8. The Kinematics/Elasticity Kinematics Analysis and Optimization of Multi-link Suspension System,U463.33
  9. Injection Process Analysis and Optimized Deign of MP4 Product Based on the Moldflow Software,TQ320.662
  10. The Mechanism Study of 5·12 Wenchuan Earthquake Triggered Landslide in Yangmaoping, Maoxian,P642.22
  11. Design and Simulation Research of the Cylinder Test-bed System,TH137
  12. Design and Analysis of the Hydraulic System of Quick Forging Hydraulic Press,TH137
  13. Development and Simulation Analysis of Job-shop Scheduling System,TH165
  14. The Research on Closed-loop Fuel Metering and Control Technology for Micro Turbine Engine,V233.7
  15. Research on Fluid-structure Interaction Simulation and Structure Optimization of Water-lubricated Stern Tube Bearings,U664.3
  16. Shotcrete and Anchor Blot Support and Reniforced Slope Toe Technique of Foundation Pit,TU753
  17. Vertical Planetary Wheel Sand Reclamation Equipment Design and Dynamic Simulation Study,TG231.5
  18. The Study of Channel Allocation Strategies in GPRS Networks,TN929.5
  19. Based on RE / RP technology design and manufacture of artificial knee,R318.1
  20. Theoretical Study on the Performance of Mechanical Seals with Deep Grooves Used in Reactor Coolant Pump,TH136
  21. Target Detection and Recognition Base on 1-D Lidar Range Image,TJ439.2

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > Moving parts > Bearing > Plain bearings
© 2012 www.DissertationTopic.Net  Mobile