Dissertation > Excellent graduate degree dissertation topics show

Special Electromagnetic Clutch for a Novel Type of Transverse Flux Permanent Magnet Motor Direct Drive

Author: WuDi
Tutor: GuChengLin
School: Huazhong University of Science and Technology
Course: Motor and electrical
Keywords: in-wheel motor direct-drive clutch transverse flux PM actuator
CLC: U463.211
Type: Master's thesis
Year: 2011
Downloads: 88
Quote: 0
Read: Download Dissertation

Abstract


With the prosperity of EV industry, some key technologies, including clutch, need to be developed desperately. So this thesis tries to design and analyse the clutchs used in a direct-drive in-wheel Transverse Flux Permanent Magnet (TFPM) motor developed by our research group.First, this thesis reviewed the history of in-wheel EV and its representative products or prototypes. The current technologies of clutchs used in in-wheel motors had also been reviewed. On the basis above, the thesis analysed the importance of in-wheel motor clutch, and pointed out some specific problems after introduced clutch. To solve the problems, this thesis proposed some feasible clutch topologies, built virtual prototypes on SolidWorks platform, and compaired the topologies above.Secondly, the design concepts of the actuator used in in-wheel motor clutch had been introduced. A bi-stable permanent magnet actuator with in-series magnetic circuit had been proposed based on these concepts. Magnetic circuit model and finite element model had been built and simulated in order to find out the appropriate parameters. And a prototype was made to verify the design. Meanwhile, a movement-direction-changing component was designed to change the horizontal movement into vertical.Thirdly, magnet flux tube method was used to build a 3D magnetic circuit analysis model of a novel type of TFPM in-wheel motor proposed by our research group. The model was compared with 3D FEA in calculating core flux using multiple sets of parameters, and a prototype was tested for validation. All the results show that the models are reliable.Finally, a simulation model of TFPM in-wheel motor direct-drive system was built on Simulink. The model of friction clutch was also built and applied in the system. The relations between motor intial speed, given force of the clutch and the clutch action time were found by plentiful simulations on Simulink. At the end, an experiment platform was built to verify the relations above.

Related Dissertations

  1. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  2. Design and Research of a Multi-Use End-Effector for Harvesting Robot,S24
  3. Effects of Nest Resource on Clutch Size Adjustment and Reproduction in Common Kestrel,Q958
  4. Research on Clutch Engagement and Simulation of Automotive Mechanical Transmission,U463.211
  5. Thermal Performance Calculation and Experimental Analysis of a Silicon Oil Fan Clutch,U463.211
  6. Analysis of Powertrain Bearing Wear and Gear Noise,U467.493
  7. Design of the Clutch Control System for Electric Automobile,U463.211
  8. Simulation of Clutch Cushion Segment Forming and Springback Analysis,TG386
  9. Research of the Control System Based on PLC for a New Intelligent Stereo Garage,U491.71
  10. Control Strategies to Reduce Both the Frictional Energy Loss and Jerk in DCT Gearshifts,U463.6
  11. Study on Hardware-in-the-loop Simulation of CODOG Power Plant Based on Synchronized-self-shift Clutch,U664.131
  12. The Research on Low Voltage Ride Through for Wind Power Generation System,TM614
  13. The Clutch Verb of HSK Syllabus,H146
  14. Direct-drive A / C -axis milling head double pendulum angle structural analysis and performance testing,TG547
  15. Low speed and high torque transverse flux permanent magnet synchronous motor control system research,TM341
  16. Wet clutch slippery MICROGLEIT resistance and thermal load characteristics research,U463.211
  17. Research and Implementation of Automatic Clutch in Hybrid Electronic Vehicle,U463.211
  18. Controllable speed torque transmission clutch device,U483
  19. Direct drive washing machine drum drive control system design and implementation,TM925.33
  20. Pre-shift Control and Simulation of Dual-clutch Automatic Transmission,U463.212
  21. Integrated Control and Simulation of Dry Dual Clutch Transmission System,U463.212

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Transmission > Mechanical transmission > Clutch
© 2012 www.DissertationTopic.Net  Mobile