Dissertation > Excellent graduate degree dissertation topics show

Research on the Method of Electromagnetic Induction Data Tansmission in Downhole

Author: LaiZhiHua
Tutor: ZhangShiPing
School: Harbin Institute of Technology
Course: Instrument Science and Technology
Keywords: data transmission while drilling electromagnetic induction coupler modulation and demodulation
CLC: TE928
Type: Master's thesis
Year: 2008
Downloads: 129
Quote: 1
Read: Download Dissertation

Abstract


In oil-gas exploration and well drilling industry, the traditional mud pulse telemetry is the industrial standard of the measurement while drilling data acquisition, the typical transmission speed is 3~6bit/s, under the perfect condition can achieve 12bit/s. But, this speed is too low for high resolution data acquisition and high density data work, such as the earthquake while drilling or the downhole image formation. The existing other technologies of measurement while drilling include: the plug method, the wet attachment method, the wireless electromagnetic method and so on, these methods all have the limitation of their own.The electromagnetic induction data transmission is a new technology for data transmission while drilling. It based on the principle of electromagnetic induction and achieved a high-speed data, real-time transmission by installing induction coil at both end of the drill pipe,which is used for inducing the electrical signal. This article is in the purpose of establishing an experiment system to simulate the work process of the real electromagnetic induction data transmission while drilling system. It is to discover and solve some kinds of technical difficulties and build the foundation of this technology applied in practice, by studying on the experiment system application.The main tasks of this article include: the overall scheme design of the experiment system, the characteristic analysis and the parameter design of induces coupler’s the design of modem, the design of relaying circuit and the correlative application program.This experiment system achieves the maximum data transmission rate of 57600 bit per second and can simulate the surface and downhole communication modules for half-duplex communication. The signal can pass through 4 simulation drill pipes and the data transmission accuracy is higher than 99.9%, without the relaying circuit. This article uses the induces coupler simulate drill pipe’s induction attachment to couple the signal, and use the binary frequency-shift keying (BFSK) method modulate or demodulate the signal, with a carrier’s center frequency is about 240 kHz.. The relaying circuit can repeat the weaken signal and change the signal channel by analog switches. Therefore, the data can be transmitted in two-way.

Related Dissertations

  1. Study of Synchronization and Adaptive Frequency in Frequency-Hopping System,TN914.41
  2. Research on Silicon-based Integrated Grating Coupler and Its Polarization-Independent Characteristic,TN622
  3. Research of Adaptive OFDM Modulation and Demodulation Project Based on Coal Mine Communication,TN919.3
  4. Secondary users based on cognitive radio receiver OFDM demodulation scheme design and FPGA realization,TN919.3
  5. Multibeam array antenna applied to array of Butler,TN820
  6. 360 ° phase shifter ESC Design and Optimization,TN623
  7. Direction of the high degree of flatness and high broadband directional coupler design research,TN622
  8. Study on Miniaturized Rat-Race Couplers for Microwave Communication Systems,TN925
  9. Research on the Polarization Error and Key Component of Optical Fiber Gyroscope,TN253
  10. Drivetrain System Design and Analysis for Hybrid Electric Commercial Vehicle,U469.7
  11. The Design of Coal Mining Machine Monitoring Communication System Based on Power Line Carrier,TP277
  12. Research on Induction Local Heating for MEMS Packaging,TP211.4
  13. Fiber Optic AE Sensing System Research and Application,TN253
  14. Research on Key Technologies of Micro-[roduction System for Ultra-Fine Polarization Maintaining Fiber,TN253
  15. Design and Experiment Study of Automotive Steering Wheel Speed Sensor,U463.4
  16. Tight- the coupler bodies machining process research,U270.34
  17. Numerical Simulation and Application of Freight Electric Locomotives Coupler,U260.34
  18. A High Precision Measurement System Based on Electromagnetic Flow-meter,TH814.93
  19. Millimeter wave band based TE_ (21) die poor network design,TN62
  20. Nanomaterials and its application in a generator,TB383.1

CLC: > Industrial Technology > Oil and gas industry > Oil machinery and equipment and automation > Drilling machinery equipment > Drilling of mechanization and automation
© 2012 www.DissertationTopic.Net  Mobile