Dissertation > Excellent graduate degree dissertation topics show

Research on the Application and Theory of Non-metallic Anchorage System Based on FRP Materials

Author: HuaiChenZi
Tutor: JinWenCheng
School: Huazhong University of Science and Technology
Course: Bridge and Tunnel Engineering
Keywords: FRP materials FRP prestressed tendons Wedge-type anchorage Contact analysis
CLC: TU757.2
Type: Master's thesis
Year: 2011
Downloads: 22
Quote: 0
Read: Download Dissertation

Abstract


With the durability of prestressed reinforced concrete structure being increasingly prominent, Fiber Reinforced Plastics or Fiber Reinforced Polymer (short for FRP) as non-metallic materials are favored by people, because of their advantages such as light weight, high tensile strength, noncorrosive, excellent fatigue performance, nonmagnetic and recycling. FRP are modern composite materials with composition of fiber as mainly material, resin as the matrix and adequate auxiliaries. The existing anchorage system for prestressed tendons and cables of steel is no longer appropriate for that of FRP due to their low transverse shear strength and crushing resistance. It is necessary to develop a new anchorage system for FRP, if FRP materials apply to cable structure or concrete structure as prestressted tendons. Many analysis and experimental researches related to bond-type anchorage and wedge-type anchorage have been conducted by domestic scholars in area of anchorage system for FRP. In those researches, anchorage barrels are made of steel, which does not solve the problem of durability. The paper researches on the application and theory of non-metallic anchorage system based on FRP materials, providing foundation of realization and further practical application in the sense of non-metallic material reinforced concrete structure.Based on current domestic and international researches and development of FRP anchorage system, as well as the existing anchorage system of steel and FRP prestressed tendons, the paper studied the stress state, tension process, anchoring characteristic of FRP prestressed tendons and relative standards, to conclude the features of non-metallic anchorage system with FRP materials. After that, paper advanced the structure form of non-metallic anchor and studied mechanical performance of this anchor by theory analysis. With finite element software, non-metallic anchor was simulated and analyzed. Considering the production, ranges of error control were concluded in the reasonable values of this anchorage system which influenced the anchorage efficiency, based on the previous research. With the result of analysis, It is suggested that error of obliquity of anchorage(6°) should be controlled between range of -1°~ +0.5°, and angle difference between anchorage barrel and clips should be controlled between range of 0.1°~ 0.4°. The non-metallic anchorage for FRP prestressed tendons (φ16mm GFRP andφ25mm CFRP) were developed in addition. The load of anchorage was also analyzed by experiment, which showed that anchorage efficiency of the non-metallic anchorage forφ16mm GFRP was 138%, larger than 95% and satisfied the requirement; the conservative ultimate bearing capacity of the non-metallic anchorage forφ25mm CFRP was 1300kN ~ 1400kN, which was 32% ~ 43% larger than designed ultimate load. Besides, combined with actual production, manufacturing process and influence factors of these non-metallic anchorages were expounded, and some problems that need paying attention to in the production were brought forward.

Related Dissertations

  1. Loaded contact analysis NW planetary gear train gear modification research,TH132.41
  2. HR601 Gearbox Structural Analysis,U463.212
  3. Rasearch on Finite Element Analysis of Modified Helical Gear Pair for Crane Reducer,TP391.7
  4. Research on Non-backlash Gear Transmission and Controllable Gear Pair,TH132.41
  5. The Research of the 2# Conticaster Large Rotative Bearing in Mei Steel Company,TF341.6
  6. 3-d Reconstruction and Fe Analysis of Soft Tissue and Mandible,TP391.41
  7. The Strength Analysis of Single-cylinder Diesel Crankshaft,TK423
  8. Research on the Support Structure of Large-Scale Wind Turbine,TM315
  9. The Research on the Tectonic Stress Field Numerical Simulation of Middle-lower Ordovician, in Tazhong Area, Tarim Basin,P618.13
  10. Study on the Interaction between Steel Tube and Concrete of Round-ended Concrete-Filled Steel Tube Tower Column,TU398.9
  11. Finite Element Analysis for MW Wind Turbine Tower,TM315
  12. The CNC Machining Methods of Spiral Bevel Gears and Software Development,TG61
  13. FEM Analysis of Static Strength for a Crankshaft of a High Power Diesel Engine,TK423
  14. Study to Design of Larger Bearing of the Shield Machine,U455.3
  15. Study on the Flexible Pressurized Anchor’s Structure and Performance,TD353.6
  16. Stress Analysis of the Sliding Blocks on the Telescopic Boom and the Research of Its Character,TH213.6
  17. Numerical Calculation and Structure Optimize of Marine Water-lubricated Bearing,U664.21
  18. Researth on the Joint Elements of Numerical Manifold Method and Its Application,TU375
  19. Study on Wheel/Rail Contact Problem of the High Power Locomotive,U211.5
  20. Numerical Simulation of the Railway Bridge Bearing,U443.361

CLC: > Industrial Technology > Building Science > Construction > The project and the type of work > Prestressed reinforced concrete structures projects > Prestressing tendons anchoring and fixture
© 2012 www.DissertationTopic.Net  Mobile