Dissertation > Excellent graduate degree dissertation topics show

Dissertation Template for Master Degree of Engineering in Design and Implementation of Test Device of Rf High Potential Withstanding Voltage for a Type of RF Connector

Author: CaoZuo
Tutor: ZhuJie；ZhuRongHua
School: Shanghai Jiaotong University
Course: Electronics and Communication Engineering
Keywords: RF connector test high voltage
CLC: TM503.5
Type: Master's thesis
Year: 2011
Downloads: 1
Quote: 0
Read: Download Dissertation

Abstract


RF connector is a kind of transmission interface components,it was be used in electrical connections and RF signal transmission between devices and device,component and component,system and subsystem. It’s a basic component to constitute a complete system. RF HIGH POTENTIAL WITHSTANDING VOLTAGE is one of four most important parameters (VSWR, insertion loss, RF leakage, RF high potential withstanding voltage).It’s a main judgment of RF connector whether could keep on working under RF high pressure. Also it’s a important parameters of RF connector.MIL-C-39012 series standard and GJB 681A-2002 marking RF high potential withstanding voltage as a quality assessment of RF connector.At present the test device of RF high potential withstanding voltage is less, the only one was manufactured by No.23 research institute of Ministry of electronic industry. The device’s frequency is 5MHz, test voltage range 0~1000V.But with the developing of technology, the new RF connector constantly emerging, technical indicators continuously improving, this device is difficult to meet the test requirements of RF connector, especially for medium-sized RF connector such as N type,L27 type,L29 type and so on. So developing the new test device of RF high potential withstanding voltage for the RF connects is particularly important.In view of this, this article analysis the test theory of RF high potential withstanding voltage and developing a test device Based on the theory. The frequency of the test device range 5MHz ~ 7MHz, the voltage range 0 ~ 3500V.It could do the test according to the MIL-C-39012 and GJB 681A-2002.Then analysis the Measurement uncertainty of the test device. The Measurement uncertainty proves that the test device can satisfy the test requirements of MIL-C-39012 and GJB 681A-2002. Finally design the method of calibration.

Related Dissertations

  1. Powered Activited Carbon-UF for Treating Micro-polluted Surface Water,X703
  2. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  3. The Method for Inertial Platform Testing and Parameter Identification,V249.322
  4. BIT Design of Computer System on Bomb Based on Radio Communication,TJ414
  5. Study of Method and Facilities for Transfering from Hot Air to Exhaust Air Converying System,TK223.25
  6. Lifetime Prediction and Channel Wall Erosion Accelerate Test of Hall Thruster,V439.2
  7. Research and Improvement of Multi-Level Modulation Self-Adaptive Digital Predistortion Algorithm,TN722.75
  8. Hardware Implementation of LEO Satellite Channel Characteristic Emulation,TN927.23
  9. Development of Software Platform for Electro-Optical Test System,TP311.52
  10. Research on Web-Based Simulation Interoperability Testing Tool,TP391.9
  11. Research on Software of TFT-LCD Testing Equipment Based on ARM,TN873.93
  12. Development of the Locomotory Cell Test and Contorl Module Based on VXIbus,TP274
  13. Development of Software Platform for Designing Automatic Test System,TP274
  14. Process Support Vector Machine and Its Application to Satellite Thermal Equilibrium Temperature Prediction,TP183
  15. Expression of D-AtCGS in E. Coli and Preparation of Polyclonal Antibody Against D-AtCGS,Q943.2
  16. Process Optimization and Degradation Kinetics for Microwave Vacuum Drying of Different Traditional Chinese Medicine Extract,TQ461
  17. Study on Extracting Process of Rhizoma Alismatis and Rhizoma Smilacis Glabrae and Their Hypouricemic Effects,R284
  18. Synthesis and Application of the chloro- methoxy fatty acid methyl esters,TQ414.8
  19. Design of Testing Equipment for Electronic Products,TN06
  20. Study on the Mechanical Properties of Pva-high Toughness Cementitious Composites,TU528
  21. The Application and Research on Web Testing Method Based on Model,TP311.53

CLC: > Industrial Technology > Electrotechnical > Electrical > General issues > Structure > Connectors
© 2012 www.DissertationTopic.Net  Mobile