Dissertation > Excellent graduate degree dissertation topics show

Study on flow characteristics of continuous casting two cold water atomized jet

Author: HuaZuoNian
Tutor: LiBaoWei; ZhaoZengWu
School: Inner Mongolia University of Science and Technology
Course: Iron and steel metallurgy
Keywords:
CLC: TF777
Type: Master's thesis
Year: 2011
Downloads: 0
Quote: 0
Read: Download Dissertation

Abstract


Spray cooling is an efficient method for high heat flux removal. With the advantages of strongly heat removing ability, low mass rate of working fluid,compact structure, and good adaptability for different environments, spray cooling can be used in almost any environments for high heat flux removal.
The aim of this article was to compare with the characteristics of nozzles at spray-angle, water-impact flux, water flow density, droplet size, and impact-velocity. The test results showed that with nozzle. ...

Related Dissertations

  1. Study on Facial Longitudinal Crack of Slabs at Shaogang,TF777
  2. Research on Slab Designing and Matching Optimization Problems in Iron & Steel Enterprise,TF777
  3. Experimental Research on Liquid Metal Free Surface Behavior under Compound Magnetic Field,TF777
  4. Forecasting Study on Quality of Slab in Continuous Casting Slab Producting Process,TF777
  5. Study on Ni-based Tenacious Wear-resistance Gradient Coating In-situ Prepared by Laser on the Surface of Crystallizer Copper Alloy,TF777
  6. Study on the Preparation of Refractories Used for the Submerged Entry Nozzle,TF777
  7. The Design and Development of Steelmaking Continuous Casting and Mould Casting Scheduling System,TF777
  8. Study on Secondary Cool Dynamic Controlling Model of Continuous Casting for Medium Thickness Slab,TF777.1
  9. The Trial of Producing Aluminum Killed Steel by Short Carved Caster,TF777.1
  10. Study on Carbon and Nitrogen Control during the Production of IF Steel,TF777
  11. Study on Inclusions Control of IF Steel for Auto Application,TF777
  12. Numerical Simulation of Magnetic Field, Fluid Flow and Solidification with M-EMS in Continuous Casting of a Large Square Bloom,TF777
  13. Research on Effects of Transition Metal Oxides on Thermal Conductivity of Mold Fluxes,TF777
  14. Simulation on Fluid Flow in Tundish with Different Flow Control Devices,TF777
  15. Research the Model and Development the Software of Secondary Cooling for Beam Blank Continuous Casting,TF777
  16. Surface Defects Inspection for Continuous Casting Slab by Pulsed Eddy Current,TF777
  17. Electrical pulses to improve the industrialization of slab solidification Study,TF777
  18. The Control Method Research on Horizontal Continuous Casting Tundish Plasma Heater,TF777
  19. Numerical Simulation of the Optimal Flow for Inclusion Removal in Tundish,TF777
  20. Study on the Method of Heat Transfer Characterization and Heat Transfer of Mold Fluxes,TF777
  21. Emulation of Dynamic Secondary Cooling and Soft Reduction in Continuous Slab Casting,TF777
  22. The crystallizer protection improvement and protection of the analyzer of slag thermal characteristics of the slag heat transfer characteristics,TF777

CLC: > Industrial Technology > Metallurgical Industry > Steelmaking > Ingot > Continuous cast steel,near net shape casting
© 2012 www.DissertationTopic.Net  Mobile