Dissertation > Excellent graduate degree dissertation topics show

The Size Effects of Fe-based Nanocrystallines on the Microwave Properties and the Flake Processing

Author: XiongXin
Tutor: SunZhiGang
School: Wuhan University of Technology
Course: Materials Science
Keywords: nanocrystallines ribbon ball mill method particle size flakes microwave electromagnetic parameters
CLC: TB383.1
Type: Master's thesis
Year: 2011
Downloads: 51
Quote: 0
Read: Download Dissertation

Abstract


Fe-based nanocrystalline alloy powder is one of the best absorber applied because of its good absorbing properties. However, particle size control is one of the key point parameters of microwave electromagnetic control. Its regulation mechanism is not yet clear. It is necessary to study the relationship between particle size and microwave electromagnetic to improve absorbing properties.In this paper, different particle sizes of Fe-based nanocrystallines powder was prepared by dry-milling method using Fe69Si14C13Cu1Nb3 ribbons as raw materials. And the size of samples controled by standard sieve to get Fe-based nanocrystallines powder. X-ray diffraction and field emission scanning electron microscopy were used to test the powder samples of the phase and morphology analysis, using a vector network analyzer to test various samples of 2-18GHz microwive electromagnetic parameters. Results are as follows:The relationship of dry milling time, grain, particle size distribution and annealing process on the electromagnetic parameters were studied. Fe-based nanocrystalline powder grains gradually was refined and the particle size was reduced with the dry-milling time, but large scale particles still remain. The maximum size of 75h dry-milled sample is about 75μm, and the average particle size is 12μm. Real part of permittivityε’of Fe-based nanocrystallines powders increased and then decreased with the milling time. But the change is not great. The real part of permeabilityμ’ the increase with milling time, mainly the magnetic loss is eddy current loss. The samples milled 75h is annealed at 500℃,550℃and 650℃. As the annealing temperature increased, the grain size of samples increases, the real part of Permittivityε’ is gradually reduced, the magnetic permeability real partμ’ increased and then decreased. The resonance absorption peak appear at about 4GHz, reflection loss of the samples annealed at 500℃,550℃and 650℃are-14.3dB、-19dB、-26.6dB.The results show that the sample with narrow particle size distribution is more easily flattened than the sample with wide particle size distribution. The samples were obtained by standard sieve for different particle size (75μm-,75μm-38μm, 38μm-25μm,25μm-15μm,15μm-8μm and the following particle size 8μm). The result is that the sample with narrow particle size permittivity is lower. The real part of permeabilityμ′and imaginaryμ″increase with the particle size decreased. Wet-milling processing has a little effect on the phase structure of particles. With the wet-milling time, samples from spherical to irregular flakes changes, the thickness of flakes reduced and the surface area increases. Real part of Permittivityε’and the magnetic permeability real partμ’increased. Further wet-milling, large pieces will be gradually broken, the real part of permittivityε’growth increased lager. The resonance absorption peak appear at about 4GHz, reflection loss of the samples wet-milled for 5h,8h and 12h are-30dB、-26.7dB、-20dB.

Related Dissertations

  1. Recovery Whey Soy Protein by Microfiltration and Development of Whey Powder,TQ936.2
  2. Study on Bacterial and Fungi Community Diversity of Different Particle Size in Paddy Soils under Long-Term Fertilization Treatments in the Tai Lake Region, China,S154.3
  3. The Application of Different Particle Size Peanut Shell Added by Wetting Agent and Nutrient Solution in Cucumber Nursery,S642.2
  4. Measurement of Spray Droplet Size Distribution and Information Entropy Analysis,TK407.9
  5. Performance of Ni electrode paste and in multilayer chip PTCR Applications,TN04
  6. Research of Preparation Technology of High Performance and Low Cost Aluminum Composite Materials,TB331
  7. Limestone particle size distribution on the CFB boiler desulfurization efficiency impact study,TK229.66
  8. Horizontal subsurface flow constructed wetland hydraulic efficiency of research,X703
  9. Waste printed circuit boards broken grading system optimization and control,X76
  10. Synthesis and Modification of Soap-free Emulsion of Terpolymer AM-ST-DADMAC and Application in Papermaking,TS727
  11. Study of Medium Temperature Sintering of X9R BaTiO3-based Ceramics,TQ174.1
  12. Controll Morphology of Mg（OH）2 in Flame-Retardance and Its Modification,O614.22
  13. The Key Issue Study of Reduction of NOx Emissions in Furnace Air Stageing Combustion,TK227
  14. Effect of Soil Moisture on Starch Accumulation and Granule Size Distribution in Wheat Grain,S512.1
  15. Study Onadaptive Algorithm of Laser Particle Sizer,TN241
  16. RBFNN Hybrid Modeling and Optimizing of Cobalt Oxalate Particle Size Distributions,TP273
  17. Study on the Impact of Liner Structure to the Grinding Efficiency of Ball Mill,TD453
  18. Performance Analysis and Research of granularity precise grading sieve,TD452
  19. Research on Soft Sensing of the Overflow Particle Size for Grinding Process,TD921
  20. Effects of Different Electrical Solutions on Strength and Permeability of Saturated Porous,O611.3
  21. The Research of the Mechanism of Condense in Oil Mist Lubrication System,TH117.2

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile