Dissertation > Excellent graduate degree dissertation topics show

Simulation of Diesel Crankshaft Based on Finite Element and Multi-body Dynamics

Author: XueJiKai
Tutor: YuXueBing
School: Dalian University of Technology
Course: Power Machinery and Engineering
Keywords: Crankshaft Multi-body dynamics Finite element method Torsional vibration analysis Strength analysis
CLC: TK421
Type: Master's thesis
Year: 2011
Downloads: 134
Quote: 0
Read: Download Dissertation

Abstract


Crankshaft is one of the most important parts of the diesel engine, the simulation of it has great significance. Multi-body dynamics is an effective method of the engine body simulation, it provides a strong technical for precisely analysis the dynamic response of crankshaft system on the computer, innovative design of the crank shaft, and optimization of the design. This is the trend of engine design.Using nonlinear multi-body dynamics and 3D finite element method to analysis the strength of a 16 V-engine crankshaft. The 3D finite element solid models of crankshaft and other parts were created and reduced by substructure technique. The multi-body dynamics program, considering joints added, was introcuced to establish the multi-body dynamics model. The results of multi-body dynamics calculation were transferred to the 3D finite element model. Then the dynamic stress and fatigue strength of the crankshaft were analyzed under one operating mode. At last, check the fatigue strength.Through the simulation of the actual work and the crankshaft in a working cycle of the simulation can not only get the dynamic response characteristics, but also to the analysis of the main bearing loads at the same time, get the main bearing force, crank pin force and so on. Through the stress recovery get the transient stress distribution, find the dangerous section, check strength. Simulation of the torsional vibration shows the natural frequencies, amplitude of the free end.In the traditional analysis of dynamic, loading conditions for the deal with the complexity of the process puzzle the designers, but the multi-body dynamics and 3D finite element method used to avoid these. Increasing the dynamic response analysis of precision parts under the dynamic load. So there is great significance to the design and check of the diesel crankshaft.

Related Dissertations

  1. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Analysis and Control of 6-DOF Electrical Driven Parallel Manipulator,TP242.2
  4. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  5. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  6. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  7. Dynamic Analysis and Optimization of Six-bar Beating-up Mechanism of an Air-jet Loom,TS103.33
  8. Design and Simulation of Hot Precision Forging Die for Spur Bevel Gear,TH132.41
  9. The Band Structure in 2D Resonant Phononic Crystal,O735
  10. Research on Sensing with High Birefringent Photonic Crystal Fiber,TP212
  11. Numerical and Experimental Studies for Multi-Cracks of Asphalt Pavement with Semi-Rigid Basement Asphalt,U416.217
  12. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  13. Applications of Vector Finite Element Method to Simulate Logging While Drilling Resistivity Tools,P631.83
  14. Uniform deformation laminate interlaminar stresses Numerical simulation and high-temperature creep behavior of 40Cr steel,TB33
  15. Scrap copper smelting furnace temperature measurement method,TF811
  16. Space hyperspectral imager Compensation focusing optical system of pre-,TH743
  17. Study of Composite Drive Shaft for an Automobile,U465.6
  18. Vehicle-mounted snubbing workover rig derrick Design and analysis,TE935
  19. Particle reinforced copper matrix composites mechanical behavior of finite element analysis,TB331
  20. Finite element analysis of gear transmission machine and Kinetics,TH132.41
  21. Large opening pressure vessel structural finite element analysis and strength design,TH49

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > Diesel engine > Theory
© 2012 www.DissertationTopic.Net  Mobile