Dissertation > Excellent graduate degree dissertation topics show

Finite Element Analysis for the Residual Stress of Welded Box Column

Author: WangXiaoJie
Tutor: SunYuPing
School: Lanzhou University of Technology
Course: Structural Engineering
Keywords: box column residual stress interpolation function three dimension thermal elastic-plastic buckling analysis ultimate bearing capacity
CLC: TU391
Type: Master's thesis
Year: 2011
Downloads: 31
Quote: 0
Read: Download Dissertation

Abstract


With the advance of steel property and the develpoment of Nationaleconomy, many steel structure are used in buildings. The Welding column isan very important compression member in steel structure.In the Mid-late20th Century, Fritz Engineering structure Laboratory of Lehigh Universityfound that the initial geometric imperfections and residual stress are themost important factors that influence the ultimate bearing capacity ofcompression member. Residual stress is inevitable in the process of heatingand cooling cycles. Parabola model or broken line model about residualstress is broadly used to regulate residual stress in steel structure projects,but actually, residual stress is a complex three dimension stress field, thereis still a large gap. If more realistic residual stress used in the ultimatebearing capacity analysis, the more accurate results would be get.With the Maturity of three dimension thermal elastic-plastic finiteelement method, we can get the more accurate results about dynamic stressand strain, final residual stress and strain. The basic unknown quantity isnode temperature. According to the basic idea of finite element method, wedivide a welding column into an aggregation with finite small units.Increase temperature step by step and establish temperature interpolationfunction, we can acquire continuous temperature functions ( ,θx y,z,t) ofsolving area by using finite element calculation. Finally, we get the moreaccurate results about dynamic stress and strain, final residual stress andstrain.Based on ANSYS-a large finite element analysis software forcalculate and analysis platform,we can get three dimension final residualstress and strain of welding column by three dimension thermalelastic-plastic finite element method. APDL language is applied to build themoving heat source and coupled-field. According to the simulationcalculation result and compared the effects on residual stress in these threeaspects : height of column ,sequence of welding , number of weld bead.Ultimate bearing capacity of welding column have dropped by 20% by usingnonlinear buckling analysis of ANSYS.

Related Dissertations

  1. Study of Mechanism Using Two-Direction Pre-Stress to Control Welding Distortion and Hot Cracking,TG404
  2. Residual Stress Research of the Laminates of Integral Multilayer-Wrapped Pressure Vessel,TH49
  3. A Study of Some Analysis Properties for Fractal Interpolation Functions,O174.42
  4. Study on Temperature Field and Residual Stress Model Research of MEMS Accelerometer,TH824.4
  5. X-ray diffraction analysis of a single crystal nickel base alloy residual stress AM1,TG115.22
  6. Submerged arc welding heat source magnetron roll Numerical simulation and experimental study,TG455
  7. Welding residual stress on LNG ship tank bulkhead fatigue life,U671.83
  8. Butt welding of hull shapes Numerical Simulation and Optimization,U671.8
  9. Lining the structure carrying capacity study tunnel fire,U451
  10. Experimental Investigation and Study on the Bridges Strengthened Using Steel Plate and Concrete Composite Strengthening Technique,U445.72
  11. Study on Mechanical Property of Prestressed Concrete Girders Strengthened with CFRP,U441
  12. Min Pu Bridge Construction Technology of Steel,U445.4
  13. Characteristics and Experiment Study on Residual Stress Induced by Controlled Laser Peening,TN249
  14. The Study of Numerical Algorithms for a Class of Hypersingular Integral Equation,O241.83
  15. The Influence and Mechanism of Residual Stress of High-temperature Welding for 16MnR Welding,TG404
  16. Evolution of Shear Band, Free Volume and Hardness of as Rolled Zr-based Bulk Metallic Glasses,TG339
  17. Effect of the Rubbing and Wearing Behavior of Steel Rail by Ultrasonic Peening,TG115.58
  18. The Research on Surface-strengthening Technology Via Warm Surface-rolling,TG376
  19. Electron beam welded joints under fatigue properties and residual stress of,TG405
  20. Preparation of composite honeycomb sandwich structure and mechanical properties of,TB332
  21. Polygonal Communication Monopole Limit Bearing Capacity and the Earthquake Response Analysis,TU311.3

CLC: > Industrial Technology > Building Science > Building structure > Metal structures > Steel
© 2012 www.DissertationTopic.Net  Mobile