Dissertation > Excellent graduate degree dissertation topics show

The Analysis and Control of Electrical Vehicle Interior Noise

Author: CaoYong
Tutor: LeYuHan
School: Wuhan University of Technology
Course: Vehicle Engineering
Keywords: The interior noise modal analysis sound field distribution acoustic contribution noisy control
CLC: U467.493
Type: Master's thesis
Year: 2011
Downloads: 129
Quote: 0
Read: Download Dissertation

Abstract


As energy issues become increasingly prominent, our country is developing electric vehicle industry. EV(Electric vehicle) has inherent advantages in noisy performance, but that does not mean that designers do not need to do research in this area. Recently the design of EV mainly refer the vehicles of internal combustion engine in structure and parameters or the designing experience, and almost has nothing in noise theory and guidance for electric vehicles. However, the dynamic characteristics and noise characteristics between the motor and internal combustion engines have much difference, so that in some circumstance EV does not have an absolute advantage. So the noisy performance of electric vehicles also need special attention. However, the current EV is not enough emphasized in this area, resulting in EV at this stage is not very ideal in terms of noisy characteristics. Thus, with the industry of EV gradually from the designing stage to mass production stage in China, the analysis and control of noise in EV is particularly urgent and important.In this paper, KK-60EZ electric vehicle is analyzed, and applied finite element analysis, boundary element method and acoustic CAE, and refered domestic and international noisy control methodel of EV, discuss the analysis way to the low frequency noise of EV, and its influence factors and control measures, so as to provide theoretical support for design of reduceing the low frequency noise of the EV, and improve the quality of its interior noise; the other hand, I tried to explore a set of perfect analysis and control way to the low frequency noise inside the EV. The main contents of the article:(1) The finite element model of the white body structure and the acoustic models of the EV cavity were established, and their structural and acoustic modal analysis were carried out, and the modal frequency of each order and mode shapes are described,and it provided basis for the later noisy control.(2) The source of the vibration and noise sources of EV are summed up, and analysis the acoustic response of EV in the stimulation of vibration of the motor and road, find out the changed characteristics of noise level in the right ear of the driver and rear passenger as the vibration frequency; and Analysed the acoustic contribution of the body panel to the main field point; and provied the significance for the control by improving the structure.(3) The transfer of noise in cavity is analyzed, based on studies and results of various theories above, I proposed a variety of controlling way to different noise and vibration, and carried out some appropriate changes to the body structure to reduce noise and vibration of EV,and do the simulation for the improved cavity noise, and got good results.

Related Dissertations

  1. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  2. Analysis and Evaluation of Some Heavy Truck Drive Axle Housing’s Static and Dynamic Characteristics,U463.218.5
  3. The Design and Research of a New Type of Clamping Elements for Roller Guide,TG659
  4. The Ultimate Load and Dynamic Analysis of Transmission Tower Frame,TM753
  5. Experimental Analysis of Boom Vibration and Stress Calculation of Pipe for 46D Truck-mounted Concrete Pump,TU646
  6. Study on Aseismic of Frame Structure with Weakness Story at Bottom Considering Filled-wall Influence,TU352.11
  7. Parallel six-dimensional shaking table Design and Research,TH762.2
  8. Vehicle-mounted snubbing workover rig derrick Design and analysis,TE935
  9. Direct-drive A / C -axis milling head double pendulum angle structural analysis and performance testing,TG547
  10. Direct-drive A / C -axis CNC universal milling head swivel double Finite Element Analysis,TG547
  11. Car engine mounting system research,U464
  12. Based on the finite element analysis to improve the design of medium-duty truck chassis and Test Research,U463.32
  13. Span steel arch structure seismic performance of,TU352.11
  14. After installation of central brake transmission housing improvement , simulation and experimental study,U463.212
  15. Board structure acousticst sound power modal analysis,U661.44
  16. Baseband chip finger -joint design and research of CNC punch press,TG385.1
  17. Cracks in asphalt pavement structure with finite element analysis,U416.217
  18. Heavy Vehicle Transmission Transmission Parts Performance Analysis and Research,U463.212
  19. Research on the Structural Emission Noise of Axial Piston Pump,TH137.51
  20. Coach Vibration and Structure Modify Study of Base on Finite Element and Actual Road Test,U467
  21. Design and Fem Analysis of Mg Framework of Electric Bicycle,U484

CLC: > Transportation > Road transport > Automotive Engineering > Vehicle test > Parameters of the instruments and technology > Noise
© 2012 www.DissertationTopic.Net  Mobile