Dissertation > Excellent graduate degree dissertation topics show

Hydraulic Modular Assembled Trailer Steering System Design Analysis and Digital Platform Development

Author: DengXiaoHe
Tutor: MaLi
School: Wuhan University of Technology
Course: Vehicle Engineering
Keywords: Flat Trailer Steering system optimal design Design for manufacturability
CLC: U463.4
Type: Master's thesis
Year: 2011
Downloads: 56
Quote: 1
Read: Download Dissertation

Abstract


Research background and structure of steering system of hydraulic modular assembled trailer overseas and inland is analyzed in this thesis, combining with design objectives, significance and content. The structure and principal of overall hydraulic modular assembled trailer and steering system structure are analyzed and the whole research plans are put forward.According to theoretical requirements under current typical construction vehicle steering model, typical steering theories are analyzed, theoretical angle formula under multi axes and tandem carpool are deduced, and a unified format for the angle calculation is put forward. Hydraulic modular assembled trailer model is established by optimal theory, and utilization of symmetry is introduced.Based on the proposed steering optimal theory, parameter simulation models are established under action of forces. Model movement relationships are analyzed, appropriate loading methods are selected, and overall steering system models are established according to ADAMS software features. Simulation shows that the models are cope with the actual situation. Through mechanical analysis between existing models of domestic and foreign vehicle of same type, the force transmission ratio of domestic vehicle is still much improvement potentials.Optimal Design of steering system should not only meet kinematics of steering angle coordination, but also from dynamic aspects of design, to provide data support for manufacture of enterprises. Therefore, hydraulic modular trailer optimal design considering force factor is proposed. Typical 6 axis vehicle optimizations are done. With respect to the original model, the objective function in considering of constraints force fell 40.3%, the objective function in no considering of constraints force fell 42.4%. The optimal steering angle and best steering rod forces have no direct link, but it’s good to sacrifice some steer angle coordination to obtain appropriate steering force.For a variety of hydraulic carpool trailer combinations, steering knuckle holes will be not only numerous, but also be overlap and cross, which makes manufacturing of steering knuckle inconvenience and actual carpooling operation inappropriate. Therefore, manufacturing research of 6 to 12 axis vehicles are done for example, incorporative method, separate method and synthesis method are introduced, which provide a good constraint design for manufacturing. Then ABAQUS software is used to engage the whole steering mechanism of nonlinear finite element analysis by selecting appropriate work condition for quasistatic analysis.Finally, a common platform of optimal design for a variety of layout installments is developed by using the above research results. The platform is suit for 3 to 32 axes of character steering,3 to 5 axes of front and rear steering, and a flat trailer of steering. The digital platform has good scalability and versatility and has been put into actual practice.

Related Dissertations

  1. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  2. Steering Mechanism and Hydraulic System for the Electronic Control Hydraulic Power Steering System of Tractor,S219.02
  3. Humaniod Robot Development and Research,TP242
  4. Dynamic Analysis and Optimization of Six-bar Beating-up Mechanism of an Air-jet Loom,TS103.33
  5. Optimal Design of Suspender Replacement in Concrete Filled Steel Tubulur Arch Bridge,U448.22
  6. Universal ball joint assembly of automotive test rig design and key technology research,U467.52
  7. Simulation analysis and optimization design of pull arm garbage truck,U469.691
  8. The Structure Strength Analysis and Optimization Design of Impact Wheel for Impact Roller,U415.521
  9. Reliability Evaluation and Optimization Design of the High Power Reducer Based on Earth Pressure Balance Shield,U455.39
  10. Optimum Design Roll Passes of Continuous Rolling No12 I-Beam Steel,TG335
  11. Grand Haven steering system Competitive Marketing Strategy,F426.471
  12. Research on Adaptive Control Strategy for Steering Gear System,V421.6
  13. Analyzing the Thermal Efficiency of Domestic Gas Stove,TS914.232
  14. Optimal Riser Design of Steel Casting Based on Isolated Liquid Region,TG260
  15. Numerical Simulation and Experimental Study of Regenerative Burner Structure Optimization,TK223.23
  16. The Theory and Practice of Intelligent Optimization Technology in Water Supply System,TU991.33
  17. The Study on Optimal Design and Fuzzy Control of Active Suspension in Vehicles,U463.33
  18. Design Approach about the Pipe-net of Oilfield-flooding System Based on Improve Ant Colony Algorithm,TE357.6
  19. The Simulation and Optimization of Hydraulic Excavator Working Device Based on ADAMS,TU621
  20. Study on Optimization and Parametric System Design for Spur Gear Reducer Based on UG,TP391.72
  21. Deep Continental Drilling Rig Top Drive Hydraulic System Design and Research Summary,TE922

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Steering system
© 2012 www.DissertationTopic.Net  Mobile