Dissertation > Excellent graduate degree dissertation topics show

The Research for Influence of Road Surface Roughness on Cargo Constraint System

Author: ChenYi
Tutor: ZhaoYan
School: Wuhan University of Technology
Course: Mechanical and Electronic Engineering
Keywords: road surface roughness tie down vibration
CLC: U461.5
Type: Master's thesis
Year: 2011
Downloads: 40
Quote: 1
Read: Download Dissertation

Abstract


Currently, in our country, normative documents about the operation specification of tie down is being constituted. Before this, it is necessary to make an systemic analysis of the property of the tie down when truck accidents happen. During transportation, road surface roughness of incentive for cargo constraint system exists all the time. The unevener of road surface, the more dangerous of vibration and shock to cargo constraint system and the higher frequency of accidents. This paper analyses the property of the tie down when rollover accident happens, educes the minimum number of tie down to prevent cargo apart from truck.This paper first introduces knowledge about the roughness of road. Based on the generating mechanism of random input model of single wheel, a filtered white noise model for the random inputs with four wheels correlated is established. At the same time, selecting a EQ1156W3 truck and two TD50B tie downs as the restraints of cargo, it concludes two physical models of Road-truck- cargo restraints system:direct binding and binding over the top. It is takes cargo and its restrains as the quality spring damping system in effect, then calculates the equivalent stiffness of the two different forms of binding. As needed, the dynamic model of Road-vehicle-cargo constraint system planar three-freedom, five-freedom and space eight-freedom is developed.The random road model is constructed by Matlab/Simulink based on the study of the relation of stochastic road space and time frequency power spectral density and root-mean-square. The stochastic exection signals are produced, and the vertical displacement of the B and C leveal uneven road was bulit by simulation with vehicle 25m/s. According to the model for the random inputs with four wheels correlated, it calculates stochastic exection singals about C leveal road.Change space eight-freedom model into the standward of space-state model, so it is good for calculating road-vehicle-Cargo Constraint System when using software. Because some parameters, such as the speed、lashing angle and so on, influence the stress of tie down.To facilitate the calculation analysis, using VB software interface design function, for the hybrid programming method VB and Matlab, the call of Matlab in VB application program was realized through establishing linkage between VB and Matlab ActiveX server. Meanwhlie the calculated results visualiation, convenient analysis. Finally in different level road, change incentives bound Angle and speed parameters or increase the number of tie down, calculated the stress of tie down.According to the American standard, get the minimun number of 2 tie downs to prevent cargo which the mass of 8000kg apart from vehicle. But the actual calculation results show that in D, E level road, the tie down is out of safe working condition,and Validate the method is not suitable for domestic situation. Consequently, this thesis provide some basis for state to constitute peration specification of tie down.

Related Dissertations

  1. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  2. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  3. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  4. The Equivalent Circuit Model of Radial Vibration Mode Piezoelectric Transformer and Its Application,TM406
  5. Research on Structural Vibration of Steam Piping System,TK284.1
  6. Study on Reducing the Mower Vibration by Optimizing the Crank-rod Mechanism of 170F Engine,S817.111
  7. Closed thin-walled beams composite modal damping prediction,TB33
  8. Axial fan blade vibration non-contact measurement,TD441.2
  9. Research on the Prediction of Underwater Acoustic for a Survey Ship and Reduction for Its Noise and Vibration,TB53
  10. Research on Dynamic Characteristics of Rolling Main Drive System by Taking into Account of the Gear Variable Stiffness,TH113
  11. The Development of a New Portable Internal Combustion Blast Tamping Machine,U216.631
  12. The Loading Behavior Mechanism of Reinforced Concrete Beams Strenghened by CFRP,TU375.1
  13. Dynamics Analysis and Experimental Research of a Certain Type of Pump Car Arm Frame System,TU646
  14. Research of Vibration Mechanism on the 2030 Continuous Annealing Unit’s Temper Mill,TG333
  15. Transmission towers 100m above study of wind load factors,TU311.3
  16. Dynamic Analysis of the Traction Elevator System with Finite Element Method,TU857
  17. Research on Torsional Vibration Suppression of Main Drive System of Rough Mill System,TG333
  18. Random Vibration Reliability Analysis and Research on Solder Joint of PBGA Board Level Assembly,TN405
  19. Simulating of Vibration Characteristics and Using of Elastomer Dampers in a Nuclear Power Plant,TM623.4
  20. Single-shot Absolute Optical Path Distance Measurement Based on Spectrally Resolved White Light Interferometry,TN247
  21. Study on Rheo-die-casting Process of Semi-solid Aluminum Alloy Slurry with Indirect Ultrasonic Vibration,TG249.9

CLC: > Transportation > Road transport > Automotive Engineering > Car theory > Car through sexual
© 2012 www.DissertationTopic.Net  Mobile