Dissertation > Excellent graduate degree dissertation topics show

Research on Rapid Aging Test of Automotive Catalytic Converter

Author: HaoBaoYu
Tutor: HouXianJun
School: Wuhan University of Technology
Course: Power Machinery and Engineering
Keywords: Three-way catalytic convener (TWC) repid aging tests test system device
CLC: U467
Type: Master's thesis
Year: 2011
Downloads: 72
Quote: 0
Read: Download Dissertation

Abstract


Facing worsening environmental problems and increasingly stringent emission regulation, three-way catalytic converter technology has become an important part of automotive exhaust treatment. Three-way catalytic convener for long-term use the ageing of catalytic efficiency, resulting in automobile emissions increase, on aging characteristics of three-way catalytic convener to ensure that the work of the three-way catalytic convener long-term stability, it is of great significance. With the rapid aging test method for fast and accurate assessment of three way catalyst aging properties, it can save a lot of costs, so the rapid aging of three-way catalytic convener by more and more attention.Article describes the development of three-way catalytic converter at home and abroad, domestic production of vehicle emission control enterprise’s development situation, three-way catalytic conversion of aging research, based on the aging evaluation methods for three-way catalytic converter at home and abroad, establish aging of article to the programme. Also describes the structure and composition of three-way catalytic converter, chemical composition of catalyst in catalytic converters, catalytic mechanism, nature of the catalyst, the catalyst works, characteristics of three-way catalytic converters, including the air-fuel ratio characteristics, ignition characteristics and so on. Aging mechanism of catalytic converters, aging form 4 classes on three-way catalytic converters made a detailed presentation.Article aging program is air cycle controls of HJ/T331-2006, catalytic converters on the vehicle accelerated aging test equipment for the overall design and build the aging test bench, and electronic control air systems, data acquisition system, the detailed design of the cooling system, and subsystem solutions including design, test equipment selection, hardwareconnections, software debugging.According to the test problems in the process of debugging, optimize test equipment. Organize and complete 100 hours aging test, followed by the aging of catalytic converters after the qualification test.Analysis of experimental data showed that three-way catalytic converter after 100h aging CO、HC、NOx combustion temperature rise respectively 41℃、41℃、29℃, to the disadvantage of catalytic combustion; After aging in an ideal air-fuel ratio (14.7) operating conditions, HC、CO、NOx catalytic efficiency of all three gas to 80% and the remainingconditions of low catalytic efficiency, efficient window air-fuel ratio characteristics of virtually non-existent, because the aging HC the conversion efficiency was significantly reduced catalytic performancetended to deteriorate.The test on the ageing of the catalysts for a normal aging test, on service life of catalyst performance, does a scientific assessment of the performance.

Related Dissertations

  1. Research and Application of the Microwave High Power Automatic Test System Based on the Load/Source Pull,TN722.16
  2. Research on Bus Collision and Rolling Simulation Technology,U467.14
  3. Experimental Research on Automobile Engine Inertia Parameters Identification,U467.2
  4. Automotive the starter performance of high-precision high stability of the test method and application,U467
  5. Stringer structure analysis based on the previous mini-car crashworthiness research,U467.14
  6. Hot stamping door impact beams Experimental studies and material properties gradient optimization,U467.3
  7. CAN-based automotive brake test system and its implementation,U467.5
  8. Auto pedal control mechanism assembly test rig design and its key technologies,U467.5
  9. Universal ball joint assembly of automotive test rig design and key technology research,U467.52
  10. Research on Operating Coach Rear-end Collision Simulation and Rear-structural Crashworthiness,U467.14
  11. The Simulation Research and Safety Assessment of Operating Coach During Side Impact,U467.14
  12. Coach Vibration and Structure Modify Study of Base on Finite Element and Actual Road Test,U467
  13. Research on the Virtual Experiment Technology of the Automobile Steering Stability,U467
  14. Body Structure Security Simulation and Assessment of Operating Coach Frontal Impact,U467.14
  15. Study on Mechanical Energy Storage Vehicle Crash Testing Equipment,U467.14
  16. Automobile Clutch Cover Assembly Detecting Machine Structural Error Analysis and Synthesis,U467.4
  17. Clutch comprehensive performance test bed control and fault diagnosis system,U467.5
  18. Experimental Study of Radiator Module in Vehicle,U467.3
  19. Research on the Real-time Monitoring and Early Warning System for the Engine Bench Test,U467.5
  20. Research and Design of an Automotive Wiring Harnesses Detection System,U467.4
  21. The Control Research and Design on Energy Recovery System of Automotive Transmission,U467.5

CLC: > Transportation > Road transport > Automotive Engineering > Vehicle test
© 2012 www.DissertationTopic.Net  Mobile