Dissertation > Excellent graduate degree dissertation topics show

Research on Passenger Bus Assembling-welding Line Based on Flexsim

Author: WangFuZuo
Tutor: XiangHao
School: West China University
Course: Mechanical and Electronic Engineering
Keywords: Flexsim Assembling-welding line System simulation Line optimization
CLC: U468.2
Type: Master's thesis
Year: 2011
Downloads: 116
Quote: 0
Read: Download Dissertation

Abstract


Along with the development of modem manufacturing technology, the system simulation is receiving more and more attention. Using simulation software modeling of production line production status, thereby get production line method of optimization scheme has been widely applied, also become the inevitable trend of the development of manufacturing industry. This paper using on a bus Flexsim software simulation, enterprise assembling-welding line for its existing problem propose optimization solution and achieved good optimized effect.This paper firstly introduces the development of computer simulation technology, discusses the research of technology now present situation and application prospect, then introduces the principle of discrete simulation system, and the simulation software Flexsim function and characteristic of illustrated. In addition, this article also do the following:In mastering based on the theory of system simulation of a bus enterprise assembling-welding line site investigation, collect the data and production line layout simulation of such material;Establish production line in the physical model with the master data , then builting production line simulation model based on Flexsim;Properly setting simulation model parameters, making the simulation model to real reflect the line, then running the simulation model;After analysising and researching the model simulation result carefully, we discovere the problems existing in the production line then give proposed solutions to the problemsFinally after the comprehensive evaluation of the schemes inferiority , choosing the scheme meets this enterprise welding-installation production line production status. On the basis of the selected solution, giving the forward further optimization measures, optimizing the simulation model, then testing the feasibility.After optimization, this production line station decreases 3, at the same time, reducing the total working hours and saving some of equipment and manpower resources, reducing the workshop usable floor area, and improvements for such assembling-welding line provides an effective optimization approach.

Related Dissertations

  1. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  2. Research on HID Lamp Rectifying Effect,TM923.32
  3. Research on Validation Methodology and Tool for Models of Simulation System,TP391.9
  4. Research of Predictive Control in Water Treatment Plant Based on Neuron Network,TP273.1
  5. Research on Attitude Control Law of Endo-Atmospheric Missile,TJ765.23
  6. Scene Modeling for Simulation of Hyperspectral Remote Sensing System,TP72
  7. Control System of Rotary Drying for Flake Agricultural Materials,S226.6
  8. Simulation of Passive Containment Cooling System on GOTHIC Platform,TL364.2
  9. Project Financing in Tourism Resources Development Application,F283
  10. System Simulation of the Policy Design and Efficiency for the Water Ecology Carrying Capacity,X171
  11. Analysis and Control of Several Classes of Singular Networked Systems,O231
  12. Design of the Subway Signal Simulation System,TN911.7
  13. Research on Inventory Control and Optimization of ATO System in GR Elevator Company,F426.6;F224
  14. Investigation of Wound-Rotor Brushless Doubly-Fed Frequency Control System,TM921.51
  15. Ship's ballast system simulation software research and design,U664.9
  16. A M5 Based Simulation of Hybrid Memory System and Its Application,TP333
  17. Model-based safety-related systems research and application of simulation methods,TP391.9
  18. Air-cooled screw chiller heat recovery simulation and experimental study,TU831.4
  19. Pseudo-random code phase modulation RF circuit design,TN702
  20. Simulation and Dynamic Analysis on Thermal Power Generation System,TM621.4
  21. The Collaboration of System CAE in Networked Manufacturing and Its Realization,TP391.72

CLC: > Transportation > Road transport > Automotive Engineering > Automobile factory > Factory equipment and installation
© 2012 www.DissertationTopic.Net  Mobile