Dissertation > Excellent graduate degree dissertation topics show

Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation

Author: JiaLei
Tutor: LongJun
School: Harbin Institute of Technology
Course: Polymer Chemistry and Physics
Keywords: molecular simulation carbon fiber interfacial interaction energy graft ratio interface shear
CLC: TB332
Type: Master's thesis
Year: 2008
Downloads: 181
Quote: 0
Read: Download Dissertation

Abstract


Interface is an important micro-structure to connect fibers and polymer matrices in composite materials. It makes a vital role to decide the mechinical properties of composites. In this paper, the interfacial structure and interfacial interaction energy between carbon fibers and epoxy molecules were studied by molecular simulation, and the shear behavior between carbon fibers and epoxy molecules were studied with modified shear model.Firstly, the surface structure of carbon fibers was designed from cleaved graphite layer on the molecule level. The carbon fiber models were built with the different graft ratio of hydroxyl groups and amino groups, and the interfacial models between the epoxy molecules and carbon fibers were also built.The molecular dynamic simulation was applied that epoxy molecules was adsorbed on the surface of carbon fibers, and then the change of energy was calculated to study the elements of interfacial energy. The results showed that the interfacial energy comprised the interaction of epoxy molecules /carbon atoms of the fiber surface and the interaction of epoxy molecules /the functional group grafted on fiber surface. They codetermined the value of interfacial energy. The two parts of interaction energy changed with graft ratio of functional group contrarily. The optimized graft ratio exited when interaction energy was lowest.Based on the interaction energy comparisons between the different interfacial models, the functional groups took the main role on the interfacial intensity. Besides, the optimized graft ratio of different functional groups exists so that the lowest interaction engery can be achieved. The type and chain length of the functional group also have effect on the interfacial energy.Furthermore, the interfacial shear models of epoxy molecules/carbon fiber composites similar to the real situation were analyzed by the molecular dynamic simulation. In the shear process, the relationship of interfacial shear energy and the graft ratio of functional groups was discussed. The results of non-dynamic simulation under non-periodical boundary condition indicated that the shearing energy was highest when the graft ratio of amido groups was 1.300 and 2.600 per nm2, interface was relatively stable than those at the other graft ratio. From the result of sub-dynamic simulation under periodical boundary condition, the results proved that the fastest shear velocity was lowest when the graft ratio of amido groups was 2.600 and 3.900 per nm2, interface was relatively stable than those at the other graft ratio. In summary, the final result demonstrates the stable interface structure existed at the graft ratio of 2.600 per nm2.

Related Dissertations

  1. Development of Functional Automotive Interior Textiles,TS106.6
  2. Carbon fiber reinforced epoxy resin surface treatment and interfacial properties of composite materials,TB332
  3. Atmospheric Pressure Plasma Surface Modification of Carbom Fibers and Numerical Simulation of the Discharge,TQ342.742
  4. Surface Treatment of Polyacrylonitrile Based High Modulus Carbon Fibers,TB304
  5. Studies on the Preparation and Properties of ACF/PLGA Scaffolds for Bone Tissue Engineering,R318.08
  6. 1. Improvement of tmTNF-α in Insulin Resistance of Adipocytes and Its Underlying Mechanism. 2. Construction of Conserved Sequence Deleted TNF-α Mutant and the Trimerization of Remodeled TNFRBP.,R587.1
  7. Study of Composite Drive Shaft for an Automobile,U465.6
  8. ACCC conductor transmission line based Rehabilitation Study,TM755
  9. Preparation of PAN-based ACF electrostatic spinning process on the adsorption properties of,TQ342.742
  10. Shape Memory carbon fiber composite material and its performance analysis,TB381
  11. Carbon fiber reinforced PEEK composite materials and their friction and wear properties,TB332
  12. Carbon fiber material in the functional application and development of clothing,TS941.4
  13. Carbon fiber matrix lead dioxide electrode preparation and application of,X703
  14. The Performance Research of Stay Cable Strengthened with CFRP,U443.38
  15. Mechanical Properties Analysis and Optimum Design of the Super-span Suspension Bridge with CFRP Cables,U448.25
  16. Mchanics Performance Analysis of the Super-span Cable-stayed Bridge with CFRP Cables,U448.27
  17. The Experimental Study on Carbon Fiber-Hybrid Membrance Bioreator for High Ammonia Nitrogen Wastewater,X703
  18. Grope for Treatment of the Refractory Organic Compounds in Reverse Osmosis Brine for Pertrochemiscal Wastewater,X703
  19. An Experimental Study on Adsorption of NO and Adsorption of NO and SO2 Together Over Modified Activated Carbon Fibers,X701
  20. Preparation and Selective Laser Sintering of Carbon Fibre/polyamide 12 Composite Powders,TF123.74

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Composite materials > Non-metallic composite materials
© 2012 www.DissertationTopic.Net  Mobile