Dissertation > Excellent graduate degree dissertation topics show

Study on Thermal Analysis and High-precision Temperature Control of Triple-channel Optical Filter

Author: LiJin
Tutor: LuoLi
School: Beijing Jiaotong University
Course: Microelectronics and Solid State Electronics
Keywords: Triple-channel Optical Filter Thermal Analysis ANSYS Finite Element High-precision Temperature Control Temperature sensor PID
CLC: TH74
Type: Master's thesis
Year: 2011
Downloads: 44
Quote: 0
Read: Download Dissertation

Abstract


ABSTRACT:Triple channel birefringent optical filter is the major instruments in research of solar physics. The refractive index of crystal material in optical filter is sensitive to temperature, so the optical filter has to work in the 315.15K constant temperature environment.The temperature control accuracy of the most thick ice spar-grade should be under 0.01K. The temperature difference of internal crystal in triple-channel optical filter must be less than 0.15K.In this thesis, the thermal of the triple-channel optical filter is analyzed in ANSYS. The results of thermal analysis provide guidance for the structural and temperature control design of optical filter. And the core circuit of the temperature control system is designed based on ARM7 MCU. The main research results of this thesis are as follows:1. The model of triple-channel optical filter in ANSYS is simplified and verified, which is helpful to create full and reasonable element model of thriple-channel optical filter in ANSYS.2. The effection of environmental conditions on temperature distribution of crystal is analysed. The temperature control system has to adjust heating power to different environmental conditions. And heating power influences the precision of temperature distribution on crystal.3. The results of thermal analysis provide guidance for thermal structural and temperature control system design of the triple-channel optical filter. The improvement strategies are analysed and verified. Among them, the strategy of thermostatic insulation glass can improves the temperature accuracy by 0.037K to 0.16K, which can satify optical filter work condition.4. The problems in current temperature control system and solution are analyzed. The core circuit of improved PID temperature control system is implemented based on ARM7. And the temperature information is sent to PC by UART. And the front panel of LabVIEW software in PC can display filters temperature in real-time. Experiments shows that the precision of improved temperature control system is 0.015K.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  5. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  6. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  7. Transient Thermal Analysis of Multi-Body System with Complicated Boundary Conditions,TK124
  8. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  9. Research on Ducted Fan Unmanned Vehicle Autonomous Modeling and Control Strategies,V249.122
  10. Research on Temperature Control System for Laser Diode,TP273
  11. Design the Control System of Ocean Wave’s Simulation Table Based on Theory of Fuzzy Turning PID,TP273.4
  12. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  13. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  14. The Analysis and Comparison of Adjacent Segment Degeneration of the Finite Element Caused by Three Posterior Lumbar Fusion Style,R687.3
  15. The Establishment and Preliminary Application of the Three-dimensional Finite Element Model of Ankle Joint,R687.3
  16. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  17. Bearing Capacity of Cast-in-place Piles in the Karst Region of Yichun, Jiangxi,U213.1
  18. Study on Construction Deformation Characteristic of Deep Foundation Pit of a Tunnel Working Well,TU753
  19. Analysis of Nonlinear Finite Element with Opening Infill Wall Frame Structure,TU323.5
  20. Transient Thermal Analysis of Spiral Bevel Gear under the Condition of Dry Operation,TH132.41
  21. Study of Modal Characteristics of a Car Body-in-White,U463.82

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > Optical instruments
© 2012 www.DissertationTopic.Net  Mobile