Dissertation > Excellent graduate degree dissertation topics show

Developing of a Spherical Plain Bearing Tester Under Combined Swinging Condition and Experimental Study

Author: WangGuoFeng
Tutor: QiuMing
School: Henan University of Science and Technology
Course: Mechanical Design and Theory
Keywords: Spherical plain bearing Oscillation Error Wear mechanism
CLC: TH87
Type: Master's thesis
Year: 2011
Downloads: 91
Quote: 0
Read: Download Dissertation

Abstract


Self-lubricating spherical plain bearings are widely used in aerospace, military and other areas. The working conditions of the bearing in these areas are more complex. Therefore, the bearing loses its function under the action of high oscillating frequency, heavy load and combined swinging. However, there is no unified test equipment and standard to evaluate the tribological properties of self-lubricating spherical plain bearings and this restricts the reliability and upgrade of bearings severely. According to the general situation of spherical plain bearings and test equipments at home and abroad, this paper put forward a programme of spherical plain bearing tester under combined swinging condition, and then the detailed design, computation, installation and debugging of the tester have been completed. After that, the usability of the tester was checked via the friction and wear performance test and at the same time the wear mechanism of the bearing were investigated. The main research works are as follows:The plan of a tester was designed based on the friction and wear behavior, service life and reliability of spherical plain bearings under combined swinging, high frequency and heavy load. The tester not only achieves the combined swinging but also exceeds the limits of oscillating frequency 1Hz. Meanwhile, it resolves the contradiction that the frequency and contact pressure can not raise simultaneously. Assembly drawing of the tester and the part drawing of each part were drawn, and the installation and commissioning works of the power and transmission systems, loading system and measurement system were completed.The error analysis was done for the main parameter of the tester by analog calculating and some performance experiments. It would be found that the errors of the tester were less than those of the published papers at present or equal to this, which could meet the requirements.The influence of different swinging form, oscillating frequency and contact pressure on the friction and wear properties of the self-lubricating plain bearings were analyzed by the experiment of one specific bearing,which verified the rationality of the design of each system and the running steadiness of the tester and the accuracy of measurement for data,which had already reached design goal.The micro analysis of self-lubricating plain bearings friction and wear surface was done with the SEM, EDS and 3-D profile. The wear mechanisms under the different conditions were discussed, which concluded extrusion wear, abrasive wear, adhesive wear and fatigue wear.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Study on Technology of Straight Bevel Gear Measurement and Error Evaluation,TG86
  3. Research on the Technology of Measurement and Error Evaluation of Gear Hob,TG721
  4. Tooth Profile Modeling and Machining Error Analysis of the Face Gear,TH132.41
  5. Research on Synchronous Acquisition and Processing System Detecting Defocus Signal Based on DSP,TH741
  6. Error Analysis and Measurement Method Design for the Hemispherical Resonator Gyro,V241.5
  7. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  8. The Matlab Implementation of Joint Source and Channel Decoding of Turbo Code Based on Meanmatch,TN911.22
  9. The Research of TCP Congestion Control Mechanisms in Satallite Networks,TN927.2
  10. Research of Electromagnetic Tracking Experimental System for Medical Application,TN966
  11. Simulation System of the Vehicle Experiment of the Inertial Platform and Research of Identification Method,TN966
  12. Research on the Synchronous Control Algorithm of a Special Target Simulator,TP273
  13. A Communication Board Development Based on LVDS Technology,TP273
  14. Image-Guided Adaptive Radiation Therapy of Intensity-Modulated Radiation for Cervical Cancer,R737.33
  15. The True Estimations of China’s Unemployment and the Re-examination of Okun’s Law,F224
  16. The Clinical Study of Cone-beam CT Combining with Active Breathing Control System on Lung Cancer Radiotherapy,R734.2
  17. Directed Evolution of Lipase from Penicillium Expansum FS1884 by Error Prone PCR,Q78
  18. Mutagenesis of a Laccase Gene from Pleurotus eryngii in Vitro and Expression in Pichia Pastoris,TQ925
  19. Analysis on Registration System of Forest Right,D923.2
  20. Generator Excitation System of the Anti-saturation Control,TM301.2
  21. Research on Reliable Multicast Protocol and It’s Buffer Management,TP393.04

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > Material testing machine and test equipment
© 2012 www.DissertationTopic.Net  Mobile