Dissertation > Excellent graduate degree dissertation topics show

The Molding Technology Research of Aluminum Alloy Blades

Author: YangGuang
Tutor: ZhangBaoHong
School: University of North
Course: Materials Processing Engineering
Keywords: Aluminum alloy blades isothermal extrusion three dimensional finite element simulation flasn cave tensile strength
CLC: TG379
Type: Master's thesis
Year: 2011
Downloads: 50
Quote: 0
Read: Download Dissertation

Abstract


The Aluminum alloy blades which is researched in this paper is the important parts of a product, the appearance shape of this parts is quite simple, the size accuracy requirement is high and the performance have certain requirements. For these parts, it currently has been mading by the way of a certain thickness plank is directly machine cutted processing. In addition,the manufacturing way of the aluminum profile extrusion also commonly used, cutting out the two convex platform of the parts after the hot extrusion of the aluminum alloy plank namely. The material、energy consumption are of These two kinds of manufacturing methods are big,and the production cost of These two kinds of manufacturing methods is high, so it not only does not meet the development requirements of energy saving,but aslo difficult to meet the performance requirements. To solve these problems, The“isothermal extrusion”method to the aluminum alloy blades was researched.Forming process were analyzed according to the structure characteristics of parts. Using the software DEFORM that is three-dimensional finite element numerical simulation, analyzed the metal flow pattern of the isothermal extrusion process after the simplified model is established. Firstly, discussed the influence of concave die for parts forming with the flash cave or without the flash cave, meanwhile, simulated extrusion situation of the blank with different shape and the different location of the blank put in the concave die. On this basis, analyzed the metal flow、equivalent stress and the change of Load - time curves of the extrusion process, sure the heating temperature of the extrusion of blank is 480℃、the temperature mould preheating is 450℃、the friction coefficient is 0.25、the punch running speed of 5 mm/s.According to the above results, the extrusion mould was designed and the experimental reseach was carried on. The result showed that: developed process plan was feasible,designed mould was appropriately applied,metal flow was uniform, and product precision and performance all meet the technical requirements, the tensile strength can achieve 480Mpa, which laid the foundation for engineering applications of the similar parts.

Related Dissertations

  1. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  2. A Biocompatibility Study of the Ultrapro Mesh,R656.2
  3. A Study on Properties of Composite Films from Wheat Gluten and Cornstarch,TS231
  4. Research on Modification of Fly Ash Fibers and Enhancement of Tensile Strength of Paper Made from Fly Ash Fibers,TS71
  5. Constitutive Model and Numerical Simulation of Semi-solid Forming Technology in Aluminum Alloy,TG249.9
  6. The Study on Growth Mechanism of Kirkendall Void and Its Inhibition at Interface of Micron Solder Joints,TG401
  7. Process Research on Fiber Laser-MIG Hybrid Welding Medium Thickness Aluminum,TG456.7
  8. Study on Fiber Laser Welding of Aluminum Alloy with Filler Wire,TG456.7
  9. Design and Optimation for Cross Flow Fan in Air-conditioning,TH43
  10. Study of High Power CO2 Laser Welding Technique on T-Lap Joint of 5083 Alumium Alloy,TG456.7
  11. Research of Cathode Cleaning and Weld Bead Formation During AC TIG Welding,TG457.14
  12. Study on Fiber Laser and Laser-Arc Hybrid Welding of AZ31B Wrought Magnesium Alloy,TG456.7
  13. Study on Hdrogen Degassing Effect of Ultrasonic Vibration on Both Liquid Melt and Semi-solid Slurry of Al Alloy,TG292
  14. Preparation of semi-solid ramp hypereutectic Al-Si Alloys Research,TG249.9
  15. Mg-Sn alloy microstructure and mechanical properties,TG146.22
  16. Multi-directional forging heat treatment on microstructure and properties of 7A04 aluminum impact,TG319
  17. Large aluminum beam frame forging forming process simulation and experimental study,TG316
  18. Thin aluminum milling distortion simulation and fatigue life prediction,TG54
  19. The Numerical Analysis of the Crack of Prestressed Concrete Continuous Box Girder Bridge in Cold Area,U448.213
  20. Influence of CPP-ACP Pretreatment on Resin-dentine Bonding,R783.1
  21. High-energy ball milling copper alloy and anti-corrosion,TF123.111

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Extrusion > Non-ferrous metal and alloy extrusion
© 2012 www.DissertationTopic.Net  Mobile