Dissertation > Excellent graduate degree dissertation topics show

Study on 45 steel matrix surface composites reinforced by TiB_2 particles

Author: HanWenHua
Tutor: GuoChangQing; ChengJun
School: Inner Mongolia University of Science and Technology
Course: Materials Processing Engineering
Keywords:
CLC: TB331
Type: Master's thesis
Year: 2011
Downloads: 0
Quote: 0
Read: Download Dissertation

Abstract


This paper presents a way that combines in-situ synthesis of reinforcement particulates by SHS with V-EPC infiltration technique to make TiB_2 particulates reinforced 45 steel matrix surface composites. Firstly, alloy powders mixed with certain amounts of binder and lacquer solvent, and then the powers were pressed as a 30mm diameter×5mm thickness preform in a mold with a pressure of 40MPa. When the preform is dried, it was attached on a surface of EPS template, then painted a layer of anti-sand burning coa...

Related Dissertations

  1. The Study on the Preparation and Properties of Fe @ Ag Composite Particles,TB331
  2. Study on Microstructure and Properties of (WAl12+Al2O3)/Al Hybrid Composites Prepared by In-Situ Reaction,TB331
  3. Study on Fracture Behaviour and High Temperature Mechanical Properties of TiB2P/6061Al Composite,TB331
  4. Prediction of Effective Properties for Metal Matrix Composites and Design of Toplolgy Optimization for Microstructure,TB331
  5. In Situ Fabrication of (TiBw+TiCp)/Ti Composites and Effect of TiC Particle Size on Properties of the Composites,TB331
  6. Research on Dynamic Compressive and Tensile Properties of SiCp/2024Al Composite,TB331
  7. Microstructures and Properties of Aluminium Matrix Composites Laser Produced by Hybrid Lasertig Melt Injection,TB331
  8. Study of Damping Capacity in Amorphous Carbon Fiber Reinforced Superhard Aluminum Matrix Composite,TB331
  9. The Effect of Matrix Alloying on Microstructure and Mechanical Properties of Gr_f/Al Composites,TB331
  10. Microstructures and Tribological Properties of Gr+Al2O3/Al Composites,TB331
  11. Research of the Preparation of Particulate Reinforced Magnesium Matrix Composites by Direct Current Heating,TB331
  12. Study on Structures and Properties of Ti2SnC/Cu Composites,TB331
  13. The Preparation and Characteristics of the Composite Materials of Mg Alloy and Porous HA, HA/β-TCP,TB331
  14. Study on Microstructure and Properties of （TiC+Al2O3）/Ti6A14V Composites,TB331
  15. A Study on Preparation and Properties of Diamond/Copper Composites,TB331
  16. Pulse electro-deposition of Ti -based composite anode materials and their properties,TB331
  17. Study on Technology and Wear Resistance of WC Particles Reinforced Steel (Iron) Matrix Composites Prepared by Centrifugal Casting,TB331
  18. Investigation on Thixoforming of SiC_p /Mg Composites and Simulation,TB331
  19. The Melt Treatment Process of SIC Particulate-Reinforced Aluminum Alloy,TB331
  20. Research on the Microstructure and Mechanical Properties of (TIC+TIB) Reinforced High Temperature Titanium Matrix Composites,TB331
  21. Fabrication and Properties of Copper Matrix Composite Reinforced with Ti3AlC2,TB331
  22. Preparation and Microstructure and Properties of (SIC_P +Cu)/Al Electronic Packaging Composites,TB331

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Composite materials > Metal composite materials
© 2012 www.DissertationTopic.Net  Mobile