Dissertation > Excellent graduate degree dissertation topics show

Research and Achievement on Algorithm of High-power Pulse Power Supply Charging Control Based on DSP

Author: PanTong
Tutor: FangHua
School: Guangxi University of Technology
Course: Control Theory and Control Engineering
Keywords: DSP Fuzzy PI control High-power pulse power supply charging control
CLC: TP273.4
Type: Master's thesis
Year: 2011
Downloads: 61
Quote: 0
Read: Download Dissertation

Abstract


With rapid development, since 70s of 20 century, high-power pulse power supply is used largely in scientific research, national defense, industry treating, medical treatment and so on. Which have important strategy meaning to national economy. The technology of charging control of high-power pulse power supply is the core technology of high-power pulse power supply. At present, fixed parameter common PI charging controller is used in China commonly, which has the advantage is that is simple and stable, but the weakness is that the parameter can not change following the system working state, which affect the output performance ,the life span of switch parts and increase the cost of system operation. Aim at the fixed parameter PI charging controller weakness and this thesis proposes a kind of variable parameter PI charging controller solution and focuses on specific hardware design and software design. At last we setup a simulation mode and simulation result shows that our algorithm is better than the fixed parameter common PI charging controller and the output character is less affected by variable system working state. The system operation working character is better.This thesis design focuses on the algorithm of PI charging controller for charging process whose parameter automatically adjusts based on fuzzy control rules and collects feedback current signal and then set fuzzy mode and is judged by fuzzy controller, then output new Kp and Ki parameter to PI charging controller to adjust the PWM modulation parameter. As for hardware design, TI DSP TMS320F28335-EP is the high precision float point DSP chip fulfills the calculation task of charging control algorithm and then sends out PWM wave to control the whole charging process. Considered the trend of huge energy network, this thesis designs a 100M network interface, which meets the trend of huge energy network. The charging controller hardware manly includes protection circuit, main control chip, power unit, signal collection unit, communication unit. The main function of protection circuit is the protection of mother line avoiding over-current and overvoltage. Once over-current or over-voltage, the main circuit would break and the charging circuit would stop working. The charging controller software mainly includes controller algorithm program, signal collection program, data process program. The main function of controller algorithm program is generating new parameter of PI charging controller following the real system working state based on fuzzy controller to exchange the parameter of PI charging controller.

Related Dissertations

  1. Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
  2. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  3. Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
  4. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  5. Research on Synchronous Motor Excitation Control System,TM341
  6. The AES Algorithm and Its Implementation in DSP,TN918.1
  7. The Design of a DSP-Based Robot Speech Command Recgnition System,TN912.34
  8. Research on Signal Receiving System of Phase Laser Range Finder,TN249
  9. Study on Implementation Technology of Channel Estimation in OFDM System Based on DSP,TN919.3
  10. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  11. Voice Signal De-noise Base on Wavelet and Arithmetic Implement with DSP,TN912.3
  12. Research on Image Compression and Implementation Using TMS320C6713 Based on SPIHT Algorithm,TP391.41
  13. A Study on the Technology of the Infrared Image Matching,TP391.41
  14. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  15. Development of Vxibus Common Interface Module Based on DSP,TP274
  16. Research of Acoustic Signal Acquisition System Based on DSP,TP274.2
  17. Research of DSP-based Real-time Demodulation Method of One-frequency Laser Interferometer,TN911.3
  18. Laser alignment system posture measuring device developed,TN24
  19. ATV vehicle weapon control system,TP273
  20. Design of VoIP Gateway Based on DSP,TN916.2
  21. A Novel Controller Design for Active Power Filter with Low Switching Loss,TN713.8

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system > Fuzzy control, fuzzy control system
© 2012 www.DissertationTopic.Net  Mobile