Asymmetric high-voltage isolation switch mechanism design of the motor windings

Abstract

Related Dissertations

1. Theoretical and Experimental Study of Automobile Electrical Energy-Regenerative Active Suspension,U463.33
2. Dynamic design of precision stabilization and tracking servo,U674.7
3. Research on Control Technology of Motor Operating Mechanism of High Voltage Circuit Breaker,TM561
4. The Research on Permanent Magnetic Linear Motor Actuator for High Voltage Circuit Breaker,TM561
5. High voltage circuit breaker permanent magnet motor actuator controller design,TM561
6. Research of Rotor Winding Fault Detection Based on DSP,TM303.3
7. Generator stator winding single-phase ground fault of digital simulation and traveling wave positioning,TM303.3
8. The Research of Vibrations of the Coupled Motor Stator and Rotor Forced by Electromagnetic,TM303.3
9. Novel Excitation System Based on Full Controlled Devices Rectifier,TM303
10. Development of the Electric Motor Shaft Manufacturing Quality Detection and Control System,TM303.5
11. The Design of the Superconducting Flywheel Energy Storage System and Its Energy Feedback Technology,TM303
12. The Research and Testing of Bus Fed Statistic Excitation System in Dalate Power Plant,TM303
13. Research and Design of Turn-to-turn Insulation Test Equipment for Pole Coil of Large Electric Machine,TM303.1
14. Main Insulation multi-factor aging test system design and aging properties of stator bars,TM303.3
15. The Stress Analysis on the Main Part of the Composite Storage Flywheel Rotor,TM303.3
16. The Development of Motor-characteristic Measurements Method and System Based on the Motor Inertia,TM303.3
17. Study on Inter-turn Short Circuits Detect in Rotor Winding of Generator Based on DSP,TM303.3
18. Research of Rotor Optimization Design of Novel Magnetic-Barrier Modulated Doubly-Fed Brushless Machine,TM303.3
19. Excitation Controller Based on ARM chip hardware platform design,TM303
20. Research for the Parametric Feasible Region of Mn18Cr18N Retaining Rings in the Process of Hydraulic Expansion with Additional Liquid,TM303