Dissertation > Excellent graduate degree dissertation topics show

AZ91 magnesium alloy disappeared casting process

Author: LiuFang
Tutor: LiQiuShu
School: Taiyuan University of Science and Technology
Course: Materials processing
Keywords: Expendable pattern casting(EPC) AZ91 magnesium alloy Fluidity Microstructure Casting defects
CLC: TG249.5
Type: Master's thesis
Year: 2011
Downloads: 66
Quote: 0
Read: Download Dissertation

Abstract


Expendable pattern casting (EPC) is the most promising one of the casting method, which has been known as the 21st century green production methods. Because of its unique technology and economic advantages, it has been adopted by more and more casting enterprises. Magnesium lost foam casting is a new technology in combination of advanced materials and advanced technology, which can play a series of advantages of magnesium alloys, but also of EPC technology. Therefore, it has important practical significance and applications to make lost foam casting of magnesium alloy technology.This paper can be divided into three parts: one is to study on fluidity of expendable pattern casting of AZ91 magnesium alloy; second is the microstructure of AZ 91magnesium alloy cast before heat treatment; Third part is the analysis for the lost foam casting of magnesium alloy casting defects found in the experiment.Firstly, the influence of the process parameters and pouring system (including pouring temperature, metal static head, pattern thickness, vacuum degree, open angle) on mold filling in magnesium alloy by EPC process was studied. The results indicate that the magnesium alloy EPC process must use vacuum, which can improve the fluidity dramatically. Increasing pouring temperature can also significantly improve the fluidity of AZ91 magnesium alloy. After using vacuum increasing pouring temperature can increase the mobility of magnesium alloy AZ91. The thicker the pattern is,the better fluidity of magnesium alloy is. About pattern shape, the mobility of magnesium alloys enhanced with the bigger of the opening angle of the pattern. Secondly, the microstructure of AZ91 magnesium alloy has been observed that it has strong effect of wall thickness which is that the thinner the pattern the smaller the tissue. Vacuum can significantly refine the microstructure of magnesium alloy, and the higher vacuum is, the smaller the tissue. Finally, casting defects emergence in some experiments has been analyzed, and some solutions can be used.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  3. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  6. Preliminary Study on Salt-Tolerant Mechanism of the New Pennisetum Purpereum Schumach Variety-Sumu No.2,S543.9
  7. Study on the Fine Structure of Intestine and Intestinal Mucosal Barrier in Zebrfish (Brachydanio Rerio),Q95-33
  8. Study on Characteristics of Morphology Anatomy and Physio-Biochemistry of Two Ecotype Varieties Cucumber Leggy Seedilings,S642.2
  9. Effects of Selenium on Synaptosome Membrane Fluidity and PSD-93 of Hippocampus in Rats with Drinking Water Flurosis,R599
  10. Study on the Mechanism of Heat-Induced Gelation of Myofibrillar Proteins,TS251.1
  11. Studies on the Aggregation and Microstructure of Imidazolium Ionic Liquids in Solutions,O645.1
  12. Studies of Luminescence Characteristics of Eu3+-doped Rare Earth Borates REBaB9O16 （RE=rare Earth Ions and Y）,O627.3
  13. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  14. Study on Stock Price Behavior Around Periodical Reports Based on Asymmetric Information,F832.51
  15. Research on Processings and Microstructure and Properties of HRB400MPa,TG335
  16. Effect of Adding ZrO 2 Nanopowder on Microstructure and Mechanical Properties of Carbon Steel,TB383.1
  17. The Broussonetia papyrifera fiber structure and properties of microwave - assisted the degumming process parameters optimization,TS123
  18. Rolled Mg-Zn-Ce-Zr (Mn) alloy microstructure and mechanical properties of,TG339
  19. Simulated lunar ambient temperature magnesium alloy microstructure and mechanical properties of,TG146.22
  20. Research of Preparation Technology of High Performance and Low Cost Aluminum Composite Materials,TB331
  21. Triple-Wire High Speed GMAW Butt Joint Welding Process of Marine E Grade Steel,TG457.11

CLC: > Industrial Technology > Metallurgy and Metal Craft > Casting > Special Casting > Precision Casting
© 2012 www.DissertationTopic.Net  Mobile