Dissertation > Excellent graduate degree dissertation topics show

The Failure Mechanism Analysis of the Concrete Frame Structure

Author: WangNa
Tutor: YangShuBiao
School: Hebei University of Engineering
Course: Structural Engineering
Keywords: Frame Strong column and weak beam Frame - shear wall Plastic hinge Failure mechanism Static nonlinear
CLC: TU375.4
Type: Master's thesis
Year: 2011
Downloads: 135
Quote: 0
Read: Download Dissertation

Abstract


The frame structure was widely used in various buildings in recent years. And the experts pay more and more attention to the seismic performance of frame structures. Chinese standard’s design requirements for the framework is“strong column and weak beam”, that is when the structure enters the plastic state, plastic hinges appear at the ends of beams, and have good ductility after post-yield. The structure will not collapse, and plastic deformation of structure can dissipate seismic energy.The data after the earthquake shows that the frame structures’response to the earthquake did not reach the expected requirement which is“strong column and weak beam”. Most of the frame columns were damaged seriously. Some form plastic hinges at column ends and slope. Some occur interlayer lateral displacement, then lead to an overall collapse finally. While the frame beams’damage were lighter significantly.In order to study on structure’s failure mechanism, this paper adopts Pushover analysis, introduces basic principle and process of Pushover analysis and SAP2000 finite element software. SAP2000 is powerful, that can meet requirement of the paper’s research purpose.The reasons for the frame can not reach the strong column and weak beam requirement are :(1)over bar of the beam ends;(2)strengthening to the beams of cast-in-place floor ;(3)the minimum reinforcement ratio and the minimal stirrup ratio of the columns are small;(4)axial compression ratio of columns is large relatively. But the main reason is the requirement to the columns is not enough currently. The chapter three of this essay takes a actual building as an example, designs the structure according to our specifications strictly. Then it makes Pushover analysis by SAP2000 finite element analysis software, and gets the plastic development of the structure. Improve the structure in four aspects: The first , augmenting concrete strength grade of columns.; The second , increasing the moment magnifying factors at column ends; The third , enlarging steel strength grade of columns; The fourth,. This paper makes Pushover analysis and observes the plastic development of the structures. The result shows the first three methods are all effective, the fourth method is not very effective. Besides, the paper compared that methods on economic. Enlarging steel strength grade of columns is the cheapest, while increasing the area of column section is the most expensive. Enlarging steel strength grade of columns can be used under norms, and is economic and practical.Finally, because frame - shear wall structures’damage is lighter after earthquake, the main frame do not have serious damage, while some of the shear walls have cracks or collapses. The original structure was modified to frame - shear wall structure in the chapter four of this essay. The chapter four makes Pushover analysis on the frame - shear wall structure, observes the plastic development of the structure and studies on its seismic performance. The conclusion shows that the seismic performance of frame - shear wall is good, failure mechanism is reasonable, and can meet the design expectations.

Related Dissertations

  1. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  2. Research on the Key Technology of Waterborne Transport Security System,U698
  3. The Impact of Frame-based Training of Text Oral Retelling on Junior Students’ Oral Expression Competence,G633.41
  4. A Frame-Based Vocabulary Teaching and Its Impact on the Senior One Students’ False Friend Phenomenon in English Writing,G633.41
  5. Students risk decisions in the framework of the effects of,B842
  6. Analysis of Nonlinear Finite Element with Opening Infill Wall Frame Structure,TU323.5
  7. Analysis of Seismic Behaviour of Mega Frame-Tube Structure Based on ANSYS,TU352.11
  8. Research of Error Concealment Techniques in Wireless Video Transmission Based on H.264,TN919.81
  9. Study and Practice of Integration of Operation System and GIS System Based on Workflow,P208
  10. FEA of the Small Multi-function Chassis Frame and Its Lightweight Design,S223.91
  11. Communication and Power Control Based on the Raptor Codes Over AWGN Channel,TN925
  12. Study on Yield Mechanism of Reinforced Concrete Frame Structure’s Strong Column-Weak Beam under Rare Earthquake Action,TU275
  13. Study on Adding-storeys Renovation and Reinforcement Methods of Framework Based on the Overall Performance,TU746.3
  14. A Dome projection system design and implementation,TP391.41
  15. Research on Frame Optimization of Oil-field Power Grid Based on Improved Minimum Spanning Tree Algorithm,TM715
  16. Strcutural Analysis of MW Graded Wind Turbine Mainframe System and Optimization Design,TM315
  17. Analysis and Research on Windproof of Continuous Rigid-frame Bridge,U441.3
  18. Model Test Research of High Piers and Large-span Continuous Rigid Frame Bridge,U448.23
  19. Regional marketing perspective - based investment research,F127
  20. Based on the Zend Framework of the Enterprise Office System Design and Realization,TP311.52
  21. The Image of China in the American Newspapers- Framing China,G219.712

CLC: > Industrial Technology > Building Science > Building structure > Concrete structure,reinforced concrete structure > Reinforced concrete structures > Frame
© 2012 www.DissertationTopic.Net  Mobile