Dissertation > Excellent graduate degree dissertation topics show
The Styling of Electric City Bus
Author: YinZuo
Tutor: NaJingXin
School: Jilin University
Course: Art of Design
Keywords: City bus Electric Styling Function
CLC: U469.72
Type: Master's thesis
Year: 2011
Downloads: 63
Quote: 0
Read: Download Dissertation
Abstract
|
Dissertation Title:The Styling of Electric City BusMajor:Art designing ScienceSupervisor:Na Jingxinaccording to statistics, annual oil consumption by automobile takes up about 50% of the total oil consumption in the world. As environment deteriorating, green house effect getting severely, the calls for energy saving and emission reduction are higher, development of green environmental automobile is the urgent priority of auto industry at present.Currently consumer environment of electric power car is not mature, public traffic is considered to be the main force to lead the development of electric power car in European countries, research of electric city bus is emerging.China is not willing to be left behind as well, some research institutes and companies are working on the research of electric city bus continuously, however, there are certain gaps in styling, structure and function compared with international levels. In China, the model of car and limousine are the most advanced and fashionable, but design of city bus has never changed for more than ten years. They are ugly, uncomfortable and can’t blend well with the city. Research of Chinese city bus focused on structural performance but neglected the importance of modeling design.Based on the background above, this paper researched on the modeling design of electric city bus. City bus modeling design is not as simple as single artistic model, also is not the single engineering design, they mixed together. So this paper combines design function and performance to research on electric city bus modeling design.Firstly this paper shows you a general idea of bus, describes the specific classification and the differences of them, and then investigates the current developing status of city bus and electric city bus.Secondly this paper do research on the development law of city bus styling based on entire vehicle styling, detail styling and interior styling design, and then sums up the design tendency of city bus styling in the future.Then this paper investigates electric city bus structure principle. And makes a reasoned analysis of the functional problems of city bus modeling, such as car door, two steps and three steps, A pillar blind area, interior layout design, handle design, and provides some ideas of humanized design, Then research the structural designs which influence the modeling of electric city bus. Focus on the structure changes such as electric city bus motive force system, drive system to do the research on the impact on the model design caused by those changes. Specified from motive force system, By-wire technology, in-wheel-motor.Analysed the design practice, asymmetric styling design can fix the A-pillar Blind area problem and also conform to aesthetic rule. Middle piece reinforced, back and front door opened which middle unopened design has good structure and function. Six wheel drive used in-wheel motor and low floor technique can provide convenience to passengers and extend the interior space. Use rumble seat and function division to satify the interior of human designFinally, according to all the research above, this paper describes an design thinking which more humanized and optimal in structure and better in detail design functionality.
|
Related Dissertations
- The Design and Experimental Rearch of Disposable Catalyzer in the Process of Coal Liquefaction,TQ529.1
- Recovery Whey Soy Protein by Microfiltration and Development of Whey Powder,TQ936.2
- The Inductive Load Based Vehicle Body Network Control System,U463.6
- Research on an Axial/Radial-Axial Flux Compound-Structure Permanent-Magnet Synchronous Machine Used for Hybrid Electric Vehicle,TM341
- The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
- Fuzzy Rhetoric Research of the Literary Language,H05
- Research of Aerospace Science Research and Innovation Building Design,TU244
- Modulation Pattern Recognition and Parameter Estimation for Ground Wave Radiation Sources,TN957.51
- Simulation and Experimental Study on the Scattering Properties of Two Dimensional Rough Surfaces,TP391.41
- Research on Spaceborne Hyperspectral Sensor Simulation,TP391.9
- Multiple Pairwise Keys Management Protocol of Function Node-Based for Wireless Sensor Networks,TP212.9
- Application and Research of Dual Control in Vertical Landing Aircraft,TP273
- Process Support Vector Machine and Its Application to Satellite Thermal Equilibrium Temperature Prediction,TP183
- The Changes of Microbial Community Along the Different Trophic Gradient of Seawater in Zhanjiang Bay,Q938.8
- Photosynthetic Apparatus Response to Heat Stress and the Mechanisms in Two Different Cotton with Various Leaf Colours,Q945.11
- Large the Hongshan iron ore mine personnel tracking positioning system optimization study,TN929.5
- Three-Dimensional Numerical Modelling for the Head and the Electric Field Analysis of DBS,R742.5
- Teaching of Rhythmic Gymnastics on cardiac function of female college students,G834-4
- The Evaluation and Research Rural about Ecological System Service Function,X171
- Study of Synchronous Generator Excitation Control Based on Neural Network Identification,TM31
- Effects of Plant Essential Oil on Growth Performance , Intestinal Microflora and Immunization Performance in Piglets,S828.5
CLC: > Transportation > Road transport > Automotive Engineering > A variety of automotive > Various energy vehicles > Electric vehicles
© 2012 www.DissertationTopic.Net Mobile
|