Dissertation > Excellent graduate degree dissertation topics show

The Realization of DSRC Comprehensive Testing Instrument in the ETC

Author: LuoJia
Tutor: XiaYingQing
School: Central China Normal University
Course: Circuits and Systems
Keywords: ETC DSRC USB2.O Signal acquisition Protocol analysis PC104 Closed-loop gain control
CLC: U495
Type: Master's thesis
Year: 2011
Downloads: 51
Quote: 1
Read: Download Dissertation

Abstract


ETC (Electronic Toll Collection) industry , the rapid expansion of the size of the production line with the DSRC (Dedicated Short Range Communications) devices , improve product quality has important and far-reaching significance . China is still in the initial stages of development of the field of intelligent transportation , not yet a dedicated to the high efficiency of the ETC industry DSRC equipment testing instrument . Based on this background, research and development of a dedicated non-stop electronic toll system DSRC equipment performance tester . The main content of the paper work I have undertaken in the project , divided into the following: analysis of the functional requirements of the system , the overall design ; according to requirements analysis to complete the detailed design of the hardware , including the RF module , signal processing module , signal acquisition module and PC104 modules ; brief introduction to the software framework and elaborated firmware design ; software and hardware FBI analysis system functionality . The system mainly three functions : the DSRC device simulation applied to ETC system transaction protocol analysis , the link communications test and DSRC equipment . Upgrade to enhance the DSRC product quality and product improvement plays an important role in the electronic toll collection system , with a wide range of applications .

Related Dissertations

  1. A High-Speed Data Acquisition System Based on USB2.0,TP274.2
  2. The Research on Intrusion Detection System Based on Machine Learning,TP393.08
  3. Design of Photoelectric Conversion and Data Acquisition System Based on USB2.0,TP274.2
  4. Multi-frequence Weak Signal Acquisition and Processing System Research and Design,TN911.23
  5. Design and Implementation of Lung Sound Analysis System Based on Virtual Instrument,TP274
  6. WiMAX protocol analysis software design and implementation,TP311.52
  7. Automated Fuzz Testing network protocol vulnerabilities mining method,TP393.08
  8. Infrared focal plane arrays based on USB2.0 data acquisition system,TP274.2
  9. Experimental Study on Honeybee (Apis Cerana) Electroantennogram,TN911.6
  10. Variable diameter woven synthetic vascular development,TS106.67
  11. Ares protocol analysis and traffic detection mechanism,TP393.06
  12. GPS receiver FFT capture technology and FPGA implementation,P228.4
  13. Infrared auto focus and image capture technology research,TP391.41
  14. Electrothermal chemical gun interior ballistic meshless method numerical simulation,TJ012.1
  15. FPGA-based power system harmonic detection system research and design,TM935
  16. Study on the Construction of Electronic Toll Collection Based on Area Road Network,U495
  17. The Design of Coulostatic Corrosion Monitor Based on USB Interface,TH86
  18. Development of the Pneumatic Marker System Based on USB2.0 Interface,TH138.9
  19. Design of Signal Acquisition System Base on Small Pixel X-RAY Liner Array Detector Card,TP274.2
  20. Based on pattern matching and protocol analysis Distributed Intrusion Detection,TP393.08
  21. Research on Intrusion Detection Based on Protocol Analysis and Immune Principle,TP393.08

CLC: > Transportation > Road transport > Technical management of traffic engineering and road transport > Computer applications in road transport and highway projects
© 2012 www.DissertationTopic.Net  Mobile