Dissertation > Excellent graduate degree dissertation topics show

Design and Implementation on Main Controller of Network Attached Optical Disc Jukebox

Author: MaXiaoMing
Tutor: MaWeiHua
School: Nanjing University of Aeronautics and Astronautics
Course: Computer Science and Technology
Keywords: Optical Disc Jukebox Main Controller ARM Ethernet Hierarchical Massive Storage Embedded Real-Time Database System
CLC: TP333.4
Type: Master's thesis
Year: 2011
Downloads: 20
Quote: 0
Read: Download Dissertation

Abstract


As the rapid development of society, science and technology, high demand of date volume experienced an explosive growth as well as of mass storage. Optical Disc Jukebox, in the hierarchical massive storage, as the secondary mass storage equipment, used primarily for data backup and archiving. In the past, the main controller of Optical Disc Jukebox, drive and the server were connected to SCSI bus, and the main controller controlled the drives by sending SCSI commands. A series of requirements and challenges of Optical Disc Jukebox has been stressed, for the interface of the Blu-ray drives and mainstream drivers is SATA. Especially, because of leaping of Blu-ray technology and unification of its standard.This paper, combined with the latest technical, was written by reviewing related documents, understanding Optical Disc Jukebox system’s control theory and function modules, primarily redesigned the modules of Optical Disc Jukebox. The main controller is at the core of embedded microprocessor S3C2440 based on ARM920T architecture. With built-in LCD controller, touch-screen interface and NAND controller, the system simplified hardware circuit design and shorted products development cycles. By porting embedded Linux operating system, it could improve development efficiency; develop applications with strong compatibility, at the meantime, lower maintenance costs. The system adopted embedded database (SQLite3) through transplantation to manage data. The system could read the RFID from the magazines by RFID reader module to identify each unique magazine. When the magazine had been removed, system stored the data in the embedded database; when the magazine had been moved in, it could get all the information of the magazine by querying the database. In that way, it had no need to mechanical scan, and time saving. Separating the drive’s data channel and control channel then connected control signal and sensor signal to the motor board. The main controller could achieve the purpose of controlling the drive by sending commands to the motor board. Even if the drive’s interface upgraded, it has no need to modify the master system’s interface. In this system, we use Blu-ray disc drive with SATA interface connected to the SAS bus.To be proved, the main control system fully meets requirements, which means high reliability, low cost and strong features.

Related Dissertations

  1. The Electric Power Steering System,U463.4
  2. Research and Realization of Precision Clock Synchronization Protocol,TP393.11
  3. The Design of the Dual-Camera High-Speed Synchronous Capturing System Based on Gigabit Ethernet,TP274.2
  4. Development of Experimental Robot Control System Based on ARM,TP242.6
  5. Data Collecting and Processing of Multi-Linear-CCD Visual Measuring System,TP274.2
  6. Research on Visual Servo System of Mechanical ARM,TP242.6
  7. Research on Software of TFT-LCD Testing Equipment Based on ARM,TN873.93
  8. Signal Acquisition and Processing Platform Design and Implementation of Trawl Sonar System,S951.2
  9. Research on the Key Technology of Waterborne Transport Security System,U698
  10. Study of An Embedded Chinese Medical Therapeutic Apparatus,R197.39
  11. Development of Intelligent Interpretation System Based on ARM9,TP391.44
  12. Borehole imaging device based on embedded systems research,P634.3
  13. Remote areas, distribution transformer monitoring system design theft,TM421
  14. Study of the Mechanical Strcture of a De-Icing Robot for 220kV Transmission Lines,TP242
  15. Based on the embedded Web technology Research and Implementation of Dynamic Strain Gauge,TP368.1
  16. Research and Design on Smart Home System,TP273.5
  17. Urban Rail Transit Environment and Equipment Monitoring Systems Research and Exploration,TP277
  18. Design and Implementation of Embedded Multi-parameter Intelligent Evironment Monitoring Systems,TP274
  19. Research of Ultrasonic Testing System Based on ARM Controller,TP274.53
  20. Research of Infrared Radiation Temperature Measure System Based on μC/OS-Ⅱ,TN215
  21. The Design and Implementation of Vehicle Positioning and Tracking System Based on ARM,TP368.12

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Electronic digital computer (not a continuous role in computer ) > Memory > Optical memory drive
© 2012 www.DissertationTopic.Net  Mobile