Dissertation > Excellent graduate degree dissertation topics show

Structure Reinforcement Designresearch with Console Steel Tube Column Billboard

Author: WangGanQiao
Tutor: MengWenQing；LiYongChuan
School: Hebei University of Engineering
Course: Architecture and Civil Engineering
Keywords: Console steel tube column billboards Structural strengthening Inner sleeve steel SAP2000 Static analysis Modal analysis
CLC: TU392.3
Type: Master's thesis
Year: 2011
Downloads: 65
Quote: 0
Read: Download Dissertation

Abstract


Console billboard belongs to, because of its high buildings caused by the special structure of the safety accidents and induced responsibility disputes often occur in all parts of the country. Console billboard severely affected by the wind load in long use process easy accidents, some billboards structure need reinforced.Text in the basis of existing research results, one console steel tube column billboard reinforcement engineering for example, on the basis of the outdoor advertising facilities steel structure technical regulation (CECS 148:2003) to console steel tube column billboard structure reinforcement design are also discussed. This paper systematically analyzed the mechanical characteristics of billboards structure, the design and construction of advertisement reinforce theory, comparison and the advantages and disadvantages of traditional reinforcement method, put forward the console steel tube column billboards of steel tube consolidation method within. SAP2000 respectively by using finite element software for CFST column, inside set of steel tube column and single steel tube column billboard structure static analysis and modal analysis, key comparing the different forms of column section of the influence of construction of advertisement top displacement, points out the rationality of inner sleeve tube method. Will of inner sleeve tube method is applied in engineering practice, the results show that the application of inner sleeve tube method to reinforce billboard engineering can improve the pillar stiffness, control structure, and can solve the top displacement with column the connection panel of inner sleeve tube method, strengthening the control effect is distinct, reasonable economy, construction simple, short time limit, the reinforcement for the similar structure provides a feasible ways and means.

Related Dissertations

  1. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  2. Study of Modal Characteristics of a Car Body-in-White,U463.82
  3. Analysis and Evaluation of Some Heavy Truck Drive Axle Housing’s Static and Dynamic Characteristics,U463.218.5
  4. Modal Analysis, Finite Element Modeling and Stress Calculation of Boom of 46D Truck-mounted Concrete Pump,TU646
  5. The Ultimate Load and Dynamic Analysis of Transmission Tower Frame,TM753
  6. AVIC International Plaza Building, structural stability analysis,TU973.2
  7. Vehicle-mounted snubbing workover rig derrick Design and analysis,TE935
  8. Car engine mounting system research,U464
  9. Based on the finite element analysis to improve the design of medium-duty truck chassis and Test Research,U463.32
  10. After installation of central brake transmission housing improvement , simulation and experimental study,U463.212
  11. Heavy Vehicle Transmission Transmission Parts Performance Analysis and Research,U463.212
  12. Research on the Structural Emission Noise of Axial Piston Pump,TH137.51
  13. Coach Vibration and Structure Modify Study of Base on Finite Element and Actual Road Test,U467
  14. Finite Element Analysis and Research on Heavy-Duty Truck Gearbox Housing,U463.212
  15. Based on multi-body dynamics and finite element structural strength McPherson suspension with Dynamic characteristic analysis,U463.33
  16. HR601 Gearbox Structural Analysis,U463.212
  17. Numerical Simulation and Characteristic Analysis of Flow Around the Double Row of Turbine Guide Apparatus Cascade,TV734.1
  18. Low-frequency noise characteristics of the diesel cars in the car,U467.493
  19. Vibration Analysis of Exhaust System and Its Optimization,U464.134.4
  20. Finite Element Analysis of Elasto-Plastic Cracked Beams,O346.1
  21. Wellhead tension and compression torsion device structure and hydraulic design,TE931.1

CLC: > Industrial Technology > Building Science > Building structure > Metal structures > Various types of steel > Steel structure
© 2012 www.DissertationTopic.Net  Mobile