Dissertation > Excellent graduate degree dissertation topics show

Oriented Perforating Technology Research

Author: ZhaoChunHui
Tutor: LiuPengCheng；ZhengChangJian
School: Chinese Geology University (Beijing)
Course: Petroleum and Natural Gas
Keywords: perforating technology modularization orientation technology
CLC: TE257.1
Type: Master's thesis
Year: 2009
Downloads: 280
Quote: 1
Read: Download Dissertation

Abstract


Casing perforated is currently used for oil and gas extraction after oil and gas layer are drilled open. The aim is to penetrate the casing, cement and formation within a certain depth and establish a shaft between the well and purpose layer for trial or production of oil perforation, as an important part of petroleum exploration and development, is not only related to the production of oil and gas wells, but also to the effectiveness of follow-up measures to increase production.With the increasing difficulty of exploitation, perforation is also getting higher and higher requirements. At present, the conventional direction of the perforation hole is random and therefore can not meet the special circumstances. Perforation of the direction is a new type of technology' dissertation">perforating technology which can determine the direction under the well. It uses tubing string transmission method and add a directing short between initiator and depth short. To determine the position of perforation shell by measuring the position of directing short. Perforation of the direction can reduce the pressure both of formation fracture and ground work. It is also a effective assistant to some special circumstances.Though perforation of the direction have been successful in many aspects, it is not everything. It is difficult for high angle well. This paper introduces a new type of perform- ting completion technology-modularization wire line perforating technology. It can effectively solute this problem. It uses noncable to run the hanging device of the per- forator to the desired depth. then the full modular perforating guns required by the per- forating operations are run to the well one after another. and at last, the perforating char- ges are detonated. With the technology, the aim of running multiple guns individually and detonating at one time has been realized. Based on this technology, with a special guiding design, the wireline oriented perforating is completed. The advantages of the technology are that it makes fully use of the special features of the wireline conveyed method: less equipment, easy operation, and short job time, etc. and also fulfills some functions of tubing conveyed perforating, such as, underbalanced perforating in the whole well, preventing blowout, etc. In addition, in the perforation in high pressure oil and gas wells, the modular perforators can be dropped to well bottom. Thus the wells can produce directly without restriction to the high pressure oil and gas. If the downhole tools are to be pulled out, the operation can be completed with the wellhead lubricator for the tool in the well is not long.This technology effectively solved perforator support and release fishing,etc. Well testing through simulation and field experiments show that the success rate of booster, ignition and docking is 100%.There are broad prospects for application promotion.

Related Dissertations

  1. Study on Browning Factors and Process Optimization of Casein Purified from Qula,TS252.5
  2. Parametric Approach of Active Control Technology for Tailless Flying-Wing Aircraft,V249.1
  3. The Research on the Architecture Design of Science and Technology Museum,TU242.5
  4. The Research of Steel’s Representation in Architecture,TU-0
  5. Studys in the Contemporary Brand Sales Exhibition Shop Design,TU247
  6. Experimentation Research for Deoxidize Reaction Process of NO_X Adopt Different Reburnning Fuels,TK227.1
  7. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  8. Research of Aerospace Science Research and Innovation Building Design,TU244
  9. Implementation Study of evaluation method of the high school IT courses,G633.67
  10. Research on Temprature Controling Technology of Laser Diode with Thermoelectric Cooler,TN248.4
  11. Research of Predictive Control in Water Treatment Plant Based on Neuron Network,TP273.1
  12. Energy-saving and new energy vehicle data acquisition and plateau fit technology to explore,U469.7
  13. Large the Hongshan iron ore mine personnel tracking positioning system optimization study,TN929.5
  14. Comparative Research on the Contents of Information Technology in Elementary Schools between China and India,G623.58
  15. The Analysis and Technique Research on Innovative Questions for High School Entrance Examination,G633.6
  16. A Study on University Science and Technology Innovation Environment Evaluation,G644
  17. Industry technology transfer and to undertake the environmental ethical issues of the,X2
  18. Research on Athletics Gymnastics Horizontal Bar Technology Development Regularity,G832
  19. Research and Implementation on Service-Oriented Multi-Agent System Cooperation Mechanism,TP393.09
  20. Analyiss on Dicharge Environment and the Effect of of Dust Electrostatic Coagualation,X701.2
  21. Improvement of Preparation Technology for Chitin and Chitosan from By-product of Litopenaeus Vannamei,TS254.9

CLC: > Industrial Technology > Oil and gas industry > Drilling engineering > Wash wells, cementing,completion,reservoir damage and prevention > Completion > Perforating the completion method
© 2012 www.DissertationTopic.Net  Mobile