Dissertation > Excellent graduate degree dissertation topics show
Study on Numerical Simulation for Pull Speed in Φ200 mm CZSi Growth
Author: LiHongYuan
Tutor: RenBingYan
School: Hebei University of Technology
Course: Materials Physics and Chemistry
Keywords: crystallization heat finite element method double-heater guide system temperature gradient
CLC: O781
Type: Master's thesis
Year: 2008
Downloads: 100
Quote: 0
Read: Download Dissertation
Abstract
|
Recently, the development of PV industry depends on the decreasing productive costs and the increasing photoelectric efficiency. Enhancing the productivity of crystal silicon plays an important role in reducing the costs. The typical technique is enlarging the charge mount of material. But it intensifies the natural convection of the melt, which increases the oxygen concentration and the carbon concentration. Thus the photoelectric transformation efficiency is suppressed. Furthermore, the application of magnetic field could help reduce the concentration effectively. But it is against the cost demand. Anyway, the ideal resolution is advancing the pull speed by improving the distribution of hot zone and increasing the release rate of crystallization heat.The conventional argon guide system is modified inΦ200 mm CZSi growth. Meanwhile, numerical simulation is conducted by the finite element method. The experimental results indicate that the hot zone is optimized by the new composite guide system. The vertical temperature gradient increases both in the melt and in the crystal after improvement. Pull speed is averagely advanced to 0.9 mm/min and the stability of the process is improved.The traditional thermal field in a TDR-80 CZSi furnace is improved. Mathematical modelings under different conditions are built. Meanwhile, numerical simulation is conducted by the finite element method. Effects of the extend ratio of double-heater, crucible size and melt height on the temperature distributions and heat flux are obtained. The results provide a theory for the increasing crystal growth speed and high quality.
|
Related Dissertations
- Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
- Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
- Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
- Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
- IPTV humane study guide system,TN949.292
- The Band Structure in 2D Resonant Phononic Crystal,O735
- Research on Sensing with High Birefringent Photonic Crystal Fiber,TP212
- Numerical and Experimental Studies for Multi-Cracks of Asphalt Pavement with Semi-Rigid Basement Asphalt,U416.217
- Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
- Applications of Vector Finite Element Method to Simulate Logging While Drilling Resistivity Tools,P631.83
- Uniform deformation laminate interlaminar stresses Numerical simulation and high-temperature creep behavior of 40Cr steel,TB33
- Scrap copper smelting furnace temperature measurement method,TF811
- Space hyperspectral imager Compensation focusing optical system of pre-,TH743
- Rerearch on Thermal Underwater Glider Experiment Basin and Design of the Glider,V277
- Study of Composite Drive Shaft for an Automobile,U465.6
- Vehicle-mounted snubbing workover rig derrick Design and analysis,TE935
- Particle reinforced copper matrix composites mechanical behavior of finite element analysis,TB331
- Finite element analysis of gear transmission machine and Kinetics,TH132.41
- Large opening pressure vessel structural finite element analysis and strength design,TH49
- Composite cage rotor induction motor starting performance of the design and research,TM343
- More rarely slot reactance permanent magnet synchronous motor parameter calculation and research,TM341
CLC: > Mathematical sciences and chemical > Crystallography > Crystal growth > Theories of crystal growth
© 2012 www.DissertationTopic.Net Mobile
|