Dissertation > Excellent graduate degree dissertation topics show

On Verification of Front Side Bus for Processor Module of Protection Systems

Author: ZhangJunWei
Tutor: HuLiSheng
School: Shanghai Jiaotong University
Course: Pattern Recognition and Intelligent Systems
Keywords: Nuclear Digital I&C System Front Side Bus Complex Electronic Components
CLC: TP273
Type: Master's thesis
Year: 2011
Downloads: 13
Quote: 0
Read: Download Dissertation

Abstract


Nuclear safety rules demand that verification and validation work need to be done in class 1 nuclear digital system which implements safety control in case of accident. In order to increase the safety of nuclear plant, IAEA and National Nuclear Security Administration consider that CCF still exists in CEC, and make new requirements for verification and validation. These requirements can’t be made according to IEEE standards. Until now there is still no recognized method for these systems.This paper is based on the making activity of state’s standard about the verification and validation work with National Nuclear Security Administration, and take the Front Side Bus as an example, and research the methods of verification and validation for CEC, and provide technical supports for nuclear digital protection system.1. Attend in the activity of making the standard of verification and validation for CEC .2. Analyze the protocol and the transaction timing of Front Side Bus, write the HDL program of Front Side Bus. 3. According to the verification guidelines for programmable CEC of IEC62566, and then integrate current mainstream verification technologies to make comprehensive strict simulation and verification, then list simulation waves, research assertion based verification method nd test coverage method. Then give the corresponding reports.4. Take FPGA as the object of study, analyze failure modes in nuclear digital protection system , build Markov model in order to do reliability analysis, then research the relationship between failure rateλ、repair rateμand reliability index, and do quantitative analysis.

Related Dissertations

  1. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  2. Research of Predictive Control in Water Treatment Plant Based on Neuron Network,TP273.1
  3. Research on the Control and Remedy of Nanopositioning Stage Drived by Piezo Material Lead Zirconate Titanate,TP273
  4. Sliding Mode Variable Tructure Control for Separating-Mirror System and Inhibit Chattering,TP273
  5. Design the Control System of Ocean Wave’s Simulation Table Based on Theory of Fuzzy Turning PID,TP273.4
  6. Research on Adaptive Control of Recovery of UUV with Near Wall Constraint,TP273
  7. Sewage treatment equipment design and application of automated operation,TP273
  8. Control System Research for a Nano-Material Mixer,TP273.5
  9. ATV vehicle weapon control system,TP273
  10. The Research and Application of Modified Algorithms About Fuzzy Predictive Functional Control,TP273
  11. The Optimization Design and Research to Wet Coal Dryer Mechinery Control System,TP273
  12. PID Controller Design of Linear Systems with Time Delay Based on Parametric Space and GUI Simulation,TP273
  13. A Design Study of PLC Elevator Access Control System Based on RFID,TP273.5
  14. Design of Fuzzy PID Controller Based on FPGA,TP273.4
  15. The Research of Coal Mine Drainage Automatic Control System,TP273
  16. Application of PID Control in Networked Control System,TP273
  17. Modeling and Stability Analysis of Networked Control System with Time-delay,TP273
  18. The Research of Die Casting Machine’s Real-time Control System Based on ARM,TP273
  19. The Study on the Process Control and Its Algorithm of the Automatic Coal Blending of Coal Washery Loading System,TP273
  20. Red mesh machine computer control system design,TP273
  21. Design and Implementation of the CAN-Ethernet communication protocol converter based on ARM9,TP273.5
  22. Design and Optimization Control of the Electroslag Furnace Atomization Automatic Control System,TP273

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile