Dissertation > Excellent graduate degree dissertation topics show

Study on the Key Technologies of Design and Construction of Folded Plate Cable-Stayed Space Truss Structure

Author: HeCaiYun
Tutor: ChenZhiHua
School: Tianjin University
Course: Structural Engineering
Keywords: folded plate cable-stayed truss structure static performance and dynamic characteristic optimum design complex joint prestress tensioning arc sliding construction technology
CLC: TU399
Type: Master's thesis
Year: 2008
Downloads: 42
Quote: 0
Read: Download Dissertation

Abstract


Prestressed cable-stayed truss structure is a combination of the modern prestressing technique and long-span steel structure. With good structural performance and novel architectural shape, the prestressed cable-stayed truss structure can meet the requirements of modern architecture and is suit for modern sports, public and industrial building. In this paper, under the engineering background of Binhai International Convention & Exhibition Centre Hall, aiming at some key technologies based on the folded plate cable-stayed truss structure system, the following researches will be carried out.The initiation and application of prestressed cable-stayed space truss structure is described. Based on the introduction of selected topic background, the main research work of the task in this thesis is pointed out.According to the requirement of selecting type, the disadvantages of the original structure system are pointed out. Further optimal design is put into effect. In the end the dissertation compares the performance of the optimized structure unite with the original one in order to reach the optimization effect.Using the finite element analysis software ANSYS, analysis of whole structure performance is completed under the given cable-tension prestressing force. The following characteristics are analyzed: The safe capability of the whole structure under every load case, stress distribution on the member bar, deformation analysis of whole structure, as well as the structural system’s dynamic characteristic.Theoretical analysis and experimental study on the complex node are carried out, combining with the experimental and finite element analysis result, the rationality of the finite element method and experimental method is validated. Endure performance and bearing capacity of the joint are apprised and complex nodes design is offered for reference.Based on the influence analysis of different prestress on static performance and natural vibration frequency of whole structure, optimum design of prestress value is given to reduce the maximum displacement under initial state and work state, and optimum results are obtained.Prestress tension technology and scheme are determined by suming up traditional cable tension methods. The general analysis software—ANSYS is used to analyze the tension process of cab according to specific construction process. The forced state in the course of tension process is analyzed, so the influence of prestress tension on structure performance and the structure safety can be arrived.Combinating with engineering characteristics, accumulative sliding construction on an arc track is adopted. The construction methods, installation procedure, slide rail system and the key technology are discussed.

Related Dissertations

  1. Corn fields in semi -manipulation technique of water and fertilizer coupling,S513
  2. The Design and Application of Wind Turbine Airfoil Considering the Aerodyamic Noise,TK83
  3. Performance Analysis and Optimum Design of Work Device of Rotary Drill,P634.31
  4. By stabilizing piles landslide support design theory,TU473.1
  5. The Key Technology for the Structral Dynamic and Static Analysis of a Lattice Arm Breaker Bridge-Inspection Vehicle,U446.3
  6. Design and Study on Minor-Caliber Deep Well Rescue Robot,TP242
  7. High-energy Plasma Transferred Arc System Design and Application Research of Blast Furnace Tuyere,TF321
  8. The Reliability Optimization of Stiffened Panel Using Adaptive Evolution Strategy,U661.4
  9. Dynamic Analysis and Optimum Design of Girder Erection Machine Structure,U445.36
  10. Section Optimum Analysis of Thin-Walled Compressive Bar Based on Orthogonal Experimental Method,TU311
  11. The Effects of Fertilizer Research Under Different Moisture on Mountainous Apple in Loess Hilly Region,S661.1
  12. Research on the Optimum Design of Rotary Atomizer’s Flow Channel for the Waste-to-energy Plant,TM62
  13. Fatigue Strength Optimization Design for A7N01 Aluminum Alloy Welding Joint,TG405
  14. Foundation Pit Support of Cement Soil Stirred 工 Pile Used in Silt Sand,TU473.1
  15. Optimum Design of Typical Laminated Composite Structures,V229.7
  16. Handling and Ride Performance Analysis of Fire-Extinguishing Tanker,U469.68
  17. Optimum Design of Handing Composite Chimney Based on the Genetic Algorithm,TU233
  18. Structural Design and Optimization of Aluminum Alloy Automobile Wheel,U463.343
  19. Optimum Design and Reliability Analysis of Lattice Grid Structure Based on APDL Language,TU311.2
  20. Security and Optimization of Water Supply Network in Planned Area,TU991

CLC: > Industrial Technology > Building Science > Building structure > Other structures
© 2012 www.DissertationTopic.Net  Mobile