Dissertation > Excellent graduate degree dissertation topics show

Analysis of Main Cable Configuration and Hanger Tensioning on Self-anchored Suspension Bridge

Author: WangGuoXing
Tutor: XuYue
School: Chang'an University
Course: Bridge and Tunnel Engineering
Keywords: Catenary law Flexibility matrix Cable configuration Tension of hangers Unstressed cable length
CLC: U448.25
Type: Master's thesis
Year: 2008
Downloads: 150
Quote: 0
Read: Download Dissertation

Abstract


Supported by project of real bridge and based on the Catenary theory, the calculation model to the whole bridge is set up by the general finite element computational software. To explore the impact of the construction phase tension of hangers on the cable shape and the state structure of the bridge, the reasonable state of the bridge and the construction phase tension of hangers are analysed independently. The mian research contents are as follows:1. This paper summarizes three analysis methods and fundamental formulas of flexible thread unit, reviews the inferential reasoning process of catenary cable element’s tangent stiffness matrix in order to provides a theoretical basis for self-anchored suspension bridge analysis.2. Using the pitch line law to simplify the reasonable state of the bridge,getting the horizontal force, unstressed cable length and line.Through catenary line unit tangent stiffness matrix of displacement to do incremental iterative accurate analysis, then use the same principle of non-stress length of main cable to analyze initial construction state and the final stage of construction is carried out with analysis, getting reasonable plan of tension of hangers.3. The different analytical methods on tension of hangers of the cable-stayed bridge, tied arch bridge and self-anchored suspension bridge construction phase are compared. To explore the coherence of the sling tension on the cable force changes and the main cable displacement , respectively establish models and carry through the contrastive analysis on the corresponding displacement and the change of cable force.4. According to the practical method of tension of hangers of self-anchored suspension bridge to confirm the plan of tension of hangers and establish mathematical models to assess the plan.5. Tension of hangers is the key to make sure the bridge condition goes smoothly. Through finite element analysis software Midas/Civil, the cycle iteration analyze method, which is demolition first, and then being loaded, is used in this paper. Programmes on the main cable and tension of hangers of construction process are proposed and compared. To guide the self-anchored suspension bridge’s design and construction, the impact of tension of hangers on the shape of the cable, the cable force as well as the tower partial stress is also studied in this paper.

Related Dissertations

  1. Numerical Methods on Structural Damage Identification,O346.5
  2. Study on Damage Identification of 100 Meters All Welded Steel Trestle,U441.4
  3. Study on the Method for Calculating Earthquake Response Base on Flexibility Matrix of Low Mode,TU311.3
  4. Permeability-stress Coupling Constitutive Model of Anisotropic Soft Rock,TU46
  5. Studies on Structural Identification Method in Civil Engineering,TU317
  6. Study on Damage Detection of Shengli Yellow River Bridge,U445.1
  7. Studies and Comparisons of the Methods for Structural Damage Identification,TP391.4
  8. Construction Control of Fushun Wanxin Bridge,U445
  9. Space Deformation Analysis of Thin-walled Structure,TU33
  10. Analyses of Pile-Soil-Pile Cap Interaction and Random Probabilities,TU470
  11. A Study of Flexibility Curvature Matrix for Structural Damage Identification,TU317
  12. Research of Structural Damage Detection Based on Generalized Flexibility Matrix,TU312.3
  13. Stochastic Subspace Identification and Application of Struetures under Ambient Vibration,TU311.3
  14. Empirical Genetic Algorithm and Its Application,TU311.4
  15. Construction of a Two-span Self-anchored Suspension Bridge with Single Tower,U448.25
  16. The Research on Bridges Structure Damage Detection,U446
  17. Mechanical Properties Analysis and Optimum Design of the Super-span Suspension Bridge with CFRP Cables,U448.25
  18. The Stable Type Suspension Bridge Reinforced Concrete Slab Strengthen Beam Optimizing Research,U448.25
  19. Construction of a Two-span Self-anchored Suspension Bridge with Single Tower,U448.25
  20. Refined Analysis on Suspension Bridge at Initial Stage and Construction Stage,U448.25

CLC: > Transportation > Road transport > Bridges and Culverts > All kinds of bridges > Bridge: Structure > Suspension Bridge
© 2012 www.DissertationTopic.Net  Mobile