Dissertation > Excellent graduate degree dissertation topics show

Reinforcement measures distortional buckling steel beam research to prevent curling Z

Author: XuZheng
Tutor: HuiYing
School: Nanjing University of Technology and Engineering
Course: Architecture and Civil Engineering
Keywords: lipped Z steel distortional buckling flexural member simply supported beam continuous beam reinforcing measures
CLC: TU392.1
Type: Master's thesis
Year: 2012
Downloads: 28
Quote: 0
Read: Download Dissertation

Abstract


In rencent years,the cold-formed steel has been widely used in industrial construction. With the application of the thin-walled members with edge stiffener,a new strength-governing mode, distortional buckling is emerged,it maybe become the dominating buckling mode when failure occured. distortional buckling of the thin-walled cold-formed structure was not mentioned explicit by GB50018-2002 specification.In this thesis, from the aspects of the suggested countermeasure, reinforcing measures can be valid to prevent the apperance of the distortional buckling.Firstly, five strengthening measures of adding diaphragms to restrain the occurrence of distortional buckling of the Z section beam with upright and inclined edges stiffeners are presented,and then FEM elastic and nonlinear analyses are conducted on strengthened lipped Z steel beam,comparisons are made between the validity of five strengthening measure.The best reinforcement measure is proposed based on the increase in the amount of steel.Next, FEM elastic and nonlinear analyses is carried out on the Z section beam with upright and inclined edges stiffeners under five strengthening measures of adding connecting rods, comparisons are made between five strengthening measure.Considering the amount of steel reinforcement parts and the rise of load-carrying capacity, comparisons are made between strengthening measure of adding diaphragms and adding connecting rods,the best reinforcement measures is proposed.Finally, using the finite element software analysis for different loads in the connecting rod and diaphragm reinforced with simple beam and continuous beam, found that for the simple beam, as long as the compression flange of beam was reinforced under strengthening measures of adding connecting rods and connecting rods, the suggested countermeasures can be valid to prevent the occurrence of distortional buckling; and for a continuous beam, the upper and lower flange of the beam must be reinforced to restrain the occurrence of distortional buckling. The reinforcement measures can not only prevent the occurrence of distortional buckling, but also increase the buckling load of beam. Through the economic index analysis, obtaining the best reinforcement measure under different circumstances, can be used as reference for future engineering applications.

Related Dissertations

  1. Assessment of Shenyang 2nd Ring Road Over-line Continuous Beam Bridge Safety Based on the Test,U447
  2. Experimental and theoretical analysis of the reinforcement and restoration widens box girder,U441
  3. Railway continuous beam arch combination structural design of key technologies,U448.13
  4. The Construction Control for PC Continuous Beam Bridge,U445.4
  5. The Analysis of Multi-span Prestressed Concrete Continuous Girder Bridge’s Reasonable Closure Sequence,U445.4
  6. Model Test on Vehicle-Bridge Couped Vibration for the Long-span Bridge with High-pier,U441.3
  7. Study on Interactive Buckling and Post-Buckling of Thin-Walled Lipped-Channel Beam with Web’s Stiffeners,TU392.1
  8. Nonlinear Analysis on Ultimate Bearing Capacity of Bonded Prestressed Concrete Continuous Beam,TU378.2
  9. Researches on the Direct Methods in Calculating Vertical Capacity of Cold-formed Steel Columns,TU392.1
  10. Performance Research for Distortional Buckling of Cold-formed Thin-walled C-section Steel in Bending,TU392.1
  11. Study and Practice on Monitoring Technology of Cantilever Construction for the Songhuajiang Continuous Box Girder Bridge,U445.466
  12. Study on Longitudinal Shortening of Prestressed Continuous Girder,U448.215
  13. Continuous beam , continuous rigid frame bridge cracks in webs Mechanism and Countermeasures,U445.71
  14. Test and Numerical Analysis for Arch-Beam Joint of Half-Through Continuous Beam-Arch Combination Bridge with Concrete Filled Steel Box Arch-Ribs,U448.22
  15. Study on the Lectotypes and Seismic Analysis Continuous Girder Bridge,U442.55
  16. Key Problems Research on Horizontal Swing Construction of Continuous Beam Bridge,U445.465
  17. Application of Construction Control Technology of Multi-Span Continuous Beam,U445.4
  18. Overweight Vehicle and Long Continuous Girder Bridge of Assembling Pushing New Technology,U445.462
  19. Simulation Analysis of Large Span Continuous Bridges of Railway,U448.215
  20. Concrete continuous beam bridge ramp pushing simulation and analysis of key mechanical properties of provisional member,U441
  21. Based on digital image processing technology of continuous beam vibration testing,TP391.41

CLC: > Industrial Technology > Building Science > Building structure > Metal structures > Various types of steel > Steel structure
© 2012 www.DissertationTopic.Net  Mobile