Dissertation > Excellent graduate degree dissertation topics show

High-Speed Image Acquisition System for PS-OCT Based on USB2.0

Author: HuZhiQiang
Tutor: ChenXiaoDong
School: Tianjin University
Course: Optical Engineering
Keywords: OCT USB2.0 Firmware WDM FPGA
CLC: TP274.2
Type: Master's thesis
Year: 2008
Downloads: 68
Quote: 1
Read: Download Dissertation

Abstract


OCT (Optical Coherence Tomography) is a new optical technology imaging technology based on white light interference. OCT is a non-invasive, non-intervention, high-resolutionand technology which greatly meets the requirements of the medical technology development. With OCT imaging technology used in the eye, skin, gastrointestinal and cardiovascular and other biological tissue successfully, it is gradually recognized by the medical area. OCT system is mainly composed of optical measurement, signal processing modules, synchronization control by FPGA, image acquisition interface. Image acquisition interface used for image data transmission and display.In recent years USB (Universal Serial Bus) has became a widely used interface technology, it has advantages that other bus is incomparable, such as hot-plug, high-speed and stability, low-power and so on.At present USB2.0 standard agreement that the USB bus transfer rate up to 480Mbps which meet need of the bulk data transmission, provides a high-speed data exchange method between computer and peripherals.This text finished the main work as follows:1、Based on the functions and features of new USB2.0 chip EZ-USB FX2LP from CYPRESS, formulate an appropriate data transmission programme, and completed the design of USB2.0 high-speed circuit.2、Used the firmware framework provide by USB device manufacturers, completed the equipment firmware and finished compiling and debugging under Keil CμVision2 environment;In-depth analysis of the WDM,to find the factors affecting the speed of USB, compiler USB drivers and firmware download drivers under Windows DDK environment;Developed OCT image acquisition client program under VC++ 6.0 environment.3、Analysis OCT structure and the impact on system performance. Analysis of the signal transmission process controlled by the FPGA, define the transport protocol of the image data between the FPGA and USB2.0 interface, which combine the OCT system and image transmission interface perfectly.4、Used FPGA as the controller and simulate data source,completed data transmission experiment for USB interface circuits,verified stability and reliability of system. In addition, add USB2.0 acquisition interface to the polarization OCT system, got the multi-wave plate images, and achieve the 8MB/s transmission speed in asynchronous mode.

Related Dissertations

  1. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  2. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  3. Development of LXI Arbitrary Waveform Generator,TM935
  4. Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
  5. Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
  6. Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
  7. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  8. Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
  9. Research on High-Performance Computer I/O Bus,TP336
  10. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  11. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  12. Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
  13. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  14. Development of Serial Bus Analyzer Based on Nios,TP274
  15. Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
  16. Development of Pxibus High Performance Digital I/O Module,TP274
  17. Development of LXI Counter,TP274
  18. A High-Speed Data Acquisition System Based on USB2.0,TP274.2
  19. A High-Speed and Real-Time Data Acquisition System Based on FPGA,TP274.2
  20. Research on Real-Time Performance of Computer Numerical Control System Based on Windows,TG659
  21. Design of GPS Information Receiving System Based on Nios Ⅱ,TN967.1

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Data collection and processing systems
© 2012 www.DissertationTopic.Net  Mobile