Dissertation > Excellent graduate degree dissertation topics show

Research on Automatic Calibration System for Digital Display Vibrometers

Author: LiGen
Tutor: HeWen
School: Zhejiang University
Course: Mechanical Manufacturing and Automation
Keywords: digital display vibrometers calibration image recognition software design LabVIEW
CLC: TP274
Type: Master's thesis
Year: 2012
Downloads: 39
Quote: 0
Read: Download Dissertation

Abstract


In this thesis, the key technologies and system integration of an automatic calibration system of digital display vibrometers for Zhejiang Electric Power Test Research Institute had been studied.In chapter 1, the destination and significance of the thesis were presented. First, the digital display vibrometer and its traditional calibration process were introduced. Then, the present research status of automatic measurement and control system for vibration calibration was surveyed and its developing trend was pointed out. In succession, the present research status both at home and abroad of the recognition algorithms for display value of meters was surveyed and the key technologies of the algorithms were analyzed. At last, the main research aim and content of the thesis were emphasized.In chapter 2, the overall structure of the automatic calibration system for digital display vibrometers was proposed. First, the principle and components of the system were introduced. Then, the key instruments in the system were selected. At last, the system bus design was analyzed.In chapter 3, the automatic recognition algorithms for the display value of meters were proposed. First, the image acquisition process was introduced. Then, the algorithms of image grayscale, filter, morphological process, binarization, stroke correct, segmentation and number confirmation were introduced successively. At last, the influence of image vibration on recognition precision and the recognition of digits in transition were analyzed.In chapter 4, the software of the automatic calibration system designed for digital display vibrometers was present. At the beginning, the requirements of the software were analyzed. And then the overall framework of the software was put forward. In the end, the software was introduced, which was developed with graphical programming language-LabVIEW.In chapter 5, the experiments for the designed automatic calibration system were done. The precision of the vibration level adjustment, the recognition precision of the meters’ display value and the implementation status of the software were mainly tested. Experimental results show that the automatic calibration system could meet the design requirements.In chapter 6, the achievements of the thesis were briefly summarized and the further research work was expected.

Related Dissertations

  1. Quantitative Analysis of Pyrolysis Component of Typical Low Volatile Coal of Chinese,TQ530.2
  2. Image Analysis System of Metal Transfer of Gas Metal Arc Welding,TG444
  3. Research on Nozzle Plume Temperature Distribution Measurement System,V434
  4. The Research of 3D Human Motion Capture Based on Reference Points,TP391.41
  5. Camera Calibration and Position and Pose Detecting on Vision Measurement System of PCB,TP391.41
  6. Axial fan blade vibration non-contact measurement,TD441.2
  7. Development and Application of Electronic Vehicle Controller Unit for a Hybrid Electric City Bus,U469.7
  8. Research on Key Technologies for Binocular Stereo Vision,TP391.41
  9. Target Range Based on Visual and Infrared Automotive Night Vision System,TP391.41
  10. A Self-calibration Method of Camera Based on Binocular Stereo Vision,TP391.41
  11. The Software System Design and Research of HS2503,TP311.52
  12. Research on Defects Image Acquisition and Processing Digital Technology of Pipeline Welds by Ray Radiography Detecting,TG441.7
  13. Design and Implementation of Mine Drainage Automatic Monitoring System Based on LabVIEW,TD744
  14. Research and Application of Camera Calibration in Vision Measurement System,TP391.41
  15. Research on Technology of Terrain Measuring Based on Binocular Vision,TP391.41
  16. Study on Displacement Monitoring System for Tunnel Vault Based on Digital Image Processing,TP391.41
  17. Single Camera Calibration Method Based on Dual-mirror Imaging,TP391.41
  18. Research of IF Sampling Receiver Technology,TN858
  19. Motion Control of Humanoid Robot,TP242
  20. Research of the Automatic and Precision Measurement of Crankshaft Groove in Automobile Engine Based on Shadow Casting,U464
  21. Study of Labview-Based Langmuir Probe Plasma Diagnostic System,V439

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system
© 2012 www.DissertationTopic.Net  Mobile