Dissertation > Excellent graduate degree dissertation topics show

Research on Trajectory Tracking Control Methods of Car-like Mobile Robot

Author: RenHuiRong
Tutor: MengQingHao
School: Tianjin University
Course: Control Theory and Control Engineering
Keywords: Car-like mobile robot trajectory tracking PID Radial Basis Function neural network fuzzy PID Backstepping
CLC: TP242
Type: Master's thesis
Year: 2008
Downloads: 223
Quote: 1
Read: Download Dissertation

Abstract


With the development of robot technology, the trajectory-tracking problem of mobile robot is paid more and more attention. A wheeled car-like mobile robot, which is steered by two front wheels and driven by two rear wheels, has similar kinematic model to that of a four-wheel car. So the study on the trajectory-tracking problem of the wheeled car-like mobile robot is significant for automatic drive of car as well as intelligent transportation. Due to the intrinsic non-holonomic kinematical constraints of car-like robot, it is challenging to control the robot track the given trajectory.Firstly, the lateral trajectory-tracking problem is studied when the robot moves in low speed or parameters change little. Three methods, which include the classic PID, radial basis function (RBF) neural network based adaptive PID and fuzzy self-tuning PID, are adopted for the mobile robot to realize lateral control of trajectory tracking. To control the longitudinal speed of the robot, a fuzzy speed controller is designed based on the preview control theory. Secondly, a global asymptotically stable tracking controller is designed using the backstepping method on the basis of the kinematic model of the car-like robot. Meanwhile, the Lyapunov theory is used to verify the stability of the controller.Considering the kinematic constraints, the speed limited strategy is introduced to ensure the smooth motion of the robot.The validity of three lateral control methods as well as the backstepping method is simulated with MATLAB. The merit and applicability of each method are analyzed and compared. Finally, initial trajectory-tracking experiments are implemented, in which a CMOS camera is used to acquire trajectory information. Experimental results show that, with the methods presented in this paper, the robot can track the paved trajectory well.

Related Dissertations

  1. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  2. Design of Control System for Laser Beam Steering Device,TM301.2
  3. Research and Design for the Laser’s Power Control System of Laser Direct Writing,TN249
  4. Research on Temprature Controling Technology of Laser Diode with Thermoelectric Cooler,TN248.4
  5. Research on Ducted Fan Unmanned Vehicle Autonomous Modeling and Control Strategies,V249.122
  6. Research on Temperature Control System for Laser Diode,TP273
  7. Research on the Control and Remedy of Nanopositioning Stage Drived by Piezo Material Lead Zirconate Titanate,TP273
  8. Design and Study of Temperature Chamber Control System in Servo Table,TP273
  9. Research on Input-To-State Stability of Discrete-Time Nonlinear Systems,TP13
  10. Design the Control System of Ocean Wave’s Simulation Table Based on Theory of Fuzzy Turning PID,TP273.4
  11. Study of Synchronous Generator Excitation Control Based on Neural Network Identification,TM31
  12. Multilayer coextrusion drooling forming process temperature control technology,TQ320.721
  13. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  14. Algorithm Research for Robot Trajectory Tracking Control,TP242
  15. Brushless DC Motor and Control System,TM33
  16. The Development of Linear Motor Cooling Controllers Based on DSP,TM359.4
  17. Design Control Algorithm of A Dynamic Positioning System for the Large Trailing Suction Hopper Dredger,U674.31
  18. Research on Modification and Application of Particle Swarm Optimization Algorithm Based on Control Methods,TP301.6
  19. Two Wheel Electric Bicycle Self-balance Control Algorithm Research,TP273
  20. Application of FPGA in Low SVG,TN791
  21. Design and Optimization Control of the Electroslag Furnace Atomization Automatic Control System,TP273

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Robotics > Robot
© 2012 www.DissertationTopic.Net  Mobile