Dissertation > Excellent graduate degree dissertation topics show
The New Transformer Differential Protection Based on the Time Difference Algorithm
Author: ChenZuo
Tutor: JinEnShu
School: Tohoku Electric Power University
Course: Proceedings of the
Keywords: transformer differential protection saturation EMTP Matlab dynamic test
CLC: TM772
Type: Master's thesis
Year: 2009
Downloads: 112
Quote: 1
Read: Download Dissertation
Abstract
|
Inrush current and current transformer saturation essentially all belong to the core saturation. In order to prevent transformer differential protection malfunction brought about by core saturation phenomenon, a series of settlement programs are put forward. Time difference method has been successfully applied to the bus differential protection as an effective identification method.Taking into account the excellent CT identification property of time difference method, it is introduced into transformer differential protection is this article. Because the problem that how to define time difference at internal fault and time difference at external fault exists when it is used to distinguish internal fault and external fault, an improved transformer differential protection is proposed in this paper based on a deep analysis. Through the re-definition the primary current and secondary current of transformer internal fault and external fault can be identified effectively.In the time difference method, the moment of abnormal state happening is needed to know. Many kinds of detecting method are employed in this paper, such as Wavelet method and Huang Hilbert transforms and so on. Although these methods have been widely used in its related field, duo to the lower sampling frequency and the higher real-time property, many detection methods are difficult to be effective. Sliding window iterative Fourier detection method has small calculation and rapid update speed so that it needs the requirement for real-time at low sampling frequency to detect abnormal state.In order to verify the correctness of the program proposed by this paper, the electromagnetic transient software (EMTP) is used for computer simulation. How to simulate the excitation slip is the critical issue of computer simulation. Type-96 components and non-linear resistance is selected to be as excitation slip through research the various components of the non-linear characteristics in EMTP. Not only the non-linear characteristics is considered but also the impact of residual magnetism Finally, dynamic test is set up under the situations of internal failure, external fault, closing with no-load. According to data collected by recording device, the correctness of the transformer differential protection program proposed by this paper is verified by MATLAB programming.
|
Related Dissertations
- Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
- Application Research of Digital Image Processing on Container Inspection,TP274.4
- S-lay Installation Analysis for Deepwater Pipeline,TE973
- Generator Excitation System of the Anti-saturation Control,TM301.2
- The Research and Application of Software Reliability Test for User Right Management System,TP311.53
- Research and Application of Safety Assessment Method Based on Neural Network,X937
- The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
- Research on Analytical Method to Calculate the over Voltage and Surge Impedance of Tower under Lightning,TM863
- Mining resources based on genetic algorithm optimization model of,O224
- SAR interferometric method for optimal selection,P225.2
- Design and Simulation on MDOF Robotic Prosthesis’s Shoulder,TP242
- The Simulation Technology Study of Marine Gas Turbine Based on Modular Modeling,U674.703
- The Research and Design of Low Voltage Low Power CMOS Analog Multiplier,TN432
- Study on Industrial Boiler Water Level Control System,TP273
- The issue of information sharing between the manufacturer of the same level in the supply chain environment,F406;F224.32
- Dynamics Behavior of a Stochastic Delayed SIRS Model with Saturation Incidence,O211.6
- Research of All-optical Ultra-wideband Signal Generation and Modulation,TN925
- A Multimedia Courseware Study Based on Matlab Simulation,TP317.4
- The Realization of Weight Function under MATLAB,TP319
- Circuit Design and Simulation of Proportional Valve Controller Based on CAN-BUS,TP273.5
- Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52
CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Power system protection > Protection of components
© 2012 www.DissertationTopic.Net Mobile
|