Dissertation > Excellent graduate degree dissertation topics show

Available Transfer Capability Calculation Considering UPFC

Author: SongLi
Tutor: LiGuoQing；WangZhenHao
School: Tohoku Electric Power University
Course: Proceedings of the
Keywords: power system available transfer capability Flexible AC Transmission System optimal power flow
CLC: TM726
Type: Master's thesis
Year: 2009
Downloads: 149
Quote: 1
Read: Download Dissertation

Abstract


The modern power system has been developed into a large scale AC-DC hybrid power system. The higher and higher challenges to the reliable and economic operation of power grid have been posed. This is restricted by many conditions, such as complexity of system structure, onerous operating task, and stringent requirements of power quality, as well as market and environment protection. But traditional mechanical controlling methods have a limitation which leads to the difficulty of flexible regulation in transmission of electricity and transmission equipment can not be fully used. While Flexible AC Transmission System (FACTS) is for a new solving method, it brings an unprecedented turning point in power flow controlled, stability and transmission capacity and improves power system. In this complicated large-scale power system, how to seek the best system operating method between economy、safety and reliability undoubtedly becomes the most concerned issue to the operator of system. Available Transfer Capability (ATC) not only can display the margin of safe and stabilization in power system operating, but also provide accurate information of power system’s state for operator and electricity market participants in order to guide its marketable behavior. Therefore, it seems especially important to study and calculate ATC considering FACTS devices.GUPFC will not only control the bus voltage, but also to control the power flow of many transmission lines or even a sub-network. But, if want to control the power flow between two lines, IPFC is generally adopted. The mathematical model of the Generalized Unified Power Flow Controller (GUPFC) and the Interline Power Flow Controller (IPFC) are established based on power injection method. The available transfer capability(ATC) calculation model taking GUPFC and IPFC into account is built according to add the controlling constraints, operating constraints and power injection model of GUPFC and IPFC into the optimal power flow analysis model.The central path-following interior point algorithm is applied to calculate the ATC. Numerical results with various FACTS devices based on IEEE-30 bus system not only demonstrate the capability that controlling bus voltage and power flows of more than one line or even a sub-network of GUPFC and the capability that reasonable distributing power flows among two lines, but also demonstrate the feasibility as well as the effectiveness of the model established and the algorithm proposed.

Related Dissertations

  1. Over-voltage Identification of Transmission Line Based on Hilbert-Huang Transformation,TM866
  2. Generator Excitation System of the Anti-saturation Control,TM301.2
  3. Research of Power System Reactive Power Optimization Based on Immune Ant Colony Algorithm,TP18
  4. Research on Support Vector Regression in Prediction of the Short-term Load of Power System,TM715;F224
  5. Research on Modification and Application of Particle Swarm Optimization Algorithm Based on Control Methods,TP301.6
  6. Research on Oranically-Structured of Expanding Large Scale Systems Based on Parameter Optimization,TP273
  7. The Research of Power Network Control Technology in LPG Hybrid Electric Vehicle,U469.72
  8. Control of a Switched Reluctance Generator for Small Wind Power Systems,TM352
  9. The Study of the Power System and the Ground Testing Equipment of the Micro-Satellite,V416.8
  10. J-TEXT Tokamak Electric Drift Electron Injection Power System Design,TL631.24
  11. Research on Available Transfer Capability of Power Grid,TM744
  12. Research on Application of Visualization of Analysis and Calculation in Power System,TM769
  13. Research on Optimization Algorithms of Transient Stability Control in Power System,TM712
  14. Research on Daily Load-forecasting for Power Grid Based on ANN,TM715
  15. Study of Dynamic Equivalent of Power System Based on Parameter Identification,TM712
  16. Security Risk Assessment and Vulnerability Analysis in Electrical Power System,TM711
  17. Research on Power System Static Security Risk Assessment Method,TM732
  18. Research of a Medium and Long-term Load Forecasting Method,TM715
  19. Research on Key Issuses of Network Loss Reduction for QinGPU Distribution Power GRID,TM714.3
  20. Including wind farm grid voltage region of bifurcation theory,TM712
  21. Wireless sensor networks based on power transformer temperature monitoring system,TP212.9;TN929.5

CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Transmission and distribution technology > Transmission and distribution lines
© 2012 www.DissertationTopic.Net  Mobile