Dissertation > Excellent graduate degree dissertation topics show

On-Line Monitoring Research of Arc Welding Processing Based on Wireless Communication Technical

Author: ShangHeng
Tutor: WuYiXiong；CaiYan
School: Shanghai Jiaotong University
Course: Materials Processing Engineering
Keywords: Monitoring Signal Collecting ZigBee LabVIEW
CLC: TG434
Type: Master's thesis
Year: 2009
Downloads: 152
Quote: 1
Read: Download Dissertation

Abstract


Welding quality has great impact on the quality of cars and ships, which will influence the competitiveness of enterprises in the industries. Nevertheless, these industris as traditional industry are also labor intensive area in China. The welding process is still conducted by lots of people with different technical skills, so it’s very difficult to make sure the welding quality. In order to solve this problem, a set of remote welding monitor system should be introduced, which can inspect the whole welding process and make sure the stability of welding quality.This thesis researched on a key technical, communication technical, in the monitor system. It analyzed Serial Port technical, Field bus technical, Local Area Network technical, GPRS (General Packet Radio System) technical, Bluetooth, Wireless Fidelity and ZigBee technical. And ZigBee technical was selected as communication interface.Based on ZigBee wireless communication technical, this thesis designed a set of welding process on-line monitor system. This system included VSM025A voltage sensor, CS600B current sensor, ATmega8 single chip, SZ05 wireless communication module and the server. The hardware was used to establish multi-functional convenient and low-cost experiment platform.Based on ATmega8 single chip, this thesis designed 10-bit A/D transfer interface program. Interrupt triggering program was also made to realize the connection of single chip and ZigBee network. Besides programs for baud rate and sending frequency were also made. LabVIEW Based on graph programming was selected for software development. Program of receiving voltage and current signals was made and this program could make sure the veracity of data by head-tail calibration method. The multi-functional and convenient interface can show situation of welding equipment, value of voltage and current, which also make it possible to inquire historical information and to set port. Further more, this thesis researched the start of ZigBee network, node joining and leaving, the content of different data and routing calculation and established wireless network with mixed topology.At last according to 10Hz, 50 Byte communication methods the thesis designed bit error rate experiment and the result showed that signals can be transferred in this system with 95% confidence level and the bit error rate was below 10-3. Three different welding criterions were selected to conduct arc welding signal collection experiment. The signals collected can show every period of the whole welding process, which can provide basic information for equipment management and production management.

Related Dissertations

  1. Image Analysis System of Metal Transfer of Gas Metal Arc Welding,TG444
  2. Study on the Locomotive Dynamic Supervision System,U284.48
  3. Wireless Sensor Net Based Study on Comprehensive Energy Monitoring Technology of Electric Vehicle,U469.72
  4. Research on Nozzle Plume Temperature Distribution Measurement System,V434
  5. Research of ZigBee Node Used in Smart Home,TN929.5
  6. Multi-Sensor Information Fusion and Its Applications on Wearable Computer,TP202
  7. Isolated systolic hypertension in patients with cardiac ultrasound characteristics of traditional Chinese medicine dialectical correlation exploration,R544.1
  8. Integrative treatment of elderly patients with hypertension TCM syndromes and quality of life,R544.1
  9. The Research on Comprehensive Budget Management of Highway Operation Management Units,F540.58
  10. The Electrostatic Dust Removal System Based on Microcontroller and LabVIEW,X701.2
  11. Development and Application of Primary and Secondary School Teachers’ Impression Management Tactics Questionnaire,G632.4
  12. Based on ZigBee wireless sensor network research,TN929.5
  13. The Research and Implementation of Self-tuning Method Based on Software Behavior Monitoring,TP311.5
  14. Incidence and Mechanisms of Insecticide Resistances to Organophosphates and Carbamates in Colorado Potato Beetle, Leptinotarsa Decemlineata (Say),S435.32
  15. The Internet of Things Applied Research in Clothing Industry,TN929.5
  16. Spectral Characteristics of Rice Damaged by Nilaparvata Lugens (St(?)l) and Cnaphalocrocis Medinalis(Guen(?)e),S435.112
  17. Monitoring Nitrogen Status and Growth Characters with Canopy Spectral Reflectance in Summer Maize,S513
  18. Responses of the Double-Cropping Rice Population Growth and Nitrogen Uptake to Density and Nitrogen Management and the Diagnosis Based on NDVI,S511
  19. Study on Growth Monitoring Technique Based on Pixel Un-Mixing Method and HJ Remote Sensing Images in Paddy Rice,S511
  20. Educational Equity Monitoring in China: Theoretical Exploration and Case Study,G521
  21. Research and Design on Indoor Localization System Based on ZigBee,TN929.5

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Welding equipment > Arc welding equipment
© 2012 www.DissertationTopic.Net  Mobile