Dissertation > Excellent graduate degree dissertation topics show

Research on the Key Technologies of Structural Design of Hydro-Generator Based on Pro/E

Author: WuXiaoJian
Tutor: ZhangGuanWeiï¼›JinDongHao
School: Tianjin University
Course: Mechanical Engineering
Keywords: hydro-generator structural design thrust bearing top-down design finite element analysis
CLC: TM312
Type: Master's thesis
Year: 2008
Downloads: 158
Quote: 0
Read: Download Dissertation


China is a country which is in possession of the most abundant water power resources in the world, with gross reserves of 676 million kilowatts. According to the ninth Five-Year-plan and the plan for 2010, the project to transmit electricity from the west to the east is rapidly underway. Some of large power stations located in the west which are under implementation and planning have a unit capacity of more than 500MVA. As the capacity of the machine increases, its structure size also increases. As a result, the process of choosing and designing component will encounter new problems and challenges, as traditional structures will not adapt to the new development of the machine. Therefore, it is necessary to find some new design principles. These new design principles not only include the design of the large hydro-generator itself, but also the adoption of new design tools.This research paper do the following:1. Discuss the building of large hydro-generator in our country. And analyze top-down design method and the present condition of research in top-down design system.2. Use the Nuozhadu hydro-generator as an example. Briefly introduce and summarize the structure characteristics of large hydro-generators. A structure of oblique element can be adopted in the real design of components of the generator: stator frame, rotor spider and bearing bracket. Discuss the application of double layer thrust bearing pads. Present the flow chart used when designing stator frame, rotor spider, upper bracket, lower bracket and bearing.3. Discuss rigidity and strength analysis of stator frame, upper bracket, lower bracket, rotor spider.4. Commencing with research on top-down theory research, use the generator key parts of rotor spider and upper bracket as examples, discuss how to use Pro/E top-down method in the design of generator structure.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  6. Design of Testing Equipment for Electronic Products,TN06
  7. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  8. Research on Key Technology of Recycling Horizontal Subsea Pipe Conector,TE973
  9. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  10. Submarine trenching plow machine design and stability analysis of research,TE952
  11. Sham hose drum drive means and hydraulic system of the structure,TE973
  12. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  13. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  14. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  15. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  16. Simulation of the Clinching Process Using FEA Method with Steel and Aluminum Alloy Sheets for Automotive Sunroof Frame,U463.83
  17. A Study on Design and Test of a Rotary Vane Electronic Vacuum Pump Used in Automobile,TB752
  18. M1 of CRH2-300 Train Finite Element Analysis and Travelling Comfort,U266
  19. The Design of Telescopic Asphalt Spraying System,U415.524
  20. Development of Post-process System in Sheet Metal Simulation Based on SolidWorks,TP391.72
  21. Failure Analysis and Structural Optimization of the Typical Fine Blanking Punch,TG385.2

CLC: > Industrial Technology > Electrotechnical > Motor > Generators, large the generator group ( Zonglun,) > Turbine generator
© 2012 www.DissertationTopic.Net  Mobile