Dissertation > Excellent graduate degree dissertation topics show

The Innovative Design and Mechanical Properties Research of Symmetrical Force-Amplify Crank-Type Presses

Author: ChenZhiZuo
Tutor: ZhongKangMin
School: Suzhou University
Course: Mechanical Manufacturing and Automation
Keywords: Trank type press Toggle mechanism Kinematics Dynamics Servo motor NC Stepping press
CLC: TH45
Type: Master's thesis
Year: 2009
Downloads: 180
Quote: 0
Read: Download Dissertation

Abstract


Based on the crank– linkage - slider general mechanical press, belong to one step force-amplifier press, which is still a large number of industrial applications in Industry. Structure of such presses have lots of remarkable shortcomings, such as poor balance, bulky size, noise greatly, big friction loss, mechanical properties of curves unreasonable, and not facilitate the automatic control. Besides, because of force-amplifier is one step, this kind of press could not be competent for the occasion of big nominal force. So people have to select the hydraulic press, which is easy to cause environmental pollution, or the complex structure of the screw press.For the above-mentioned disadvantage of traditional crank press , according to the symmetry of the scientific concept of aesthetics, as well as the design approach of the series combination of force-amplifier , one-step , two-step, and three-step force-amplifier crank press have been designed separately in a symmetrical layout. Major new research in the following:(1) Mathematical modeling have been made for the traditional crank press ,than a detailed analysis of kinematics and dynamics have been carried out for it, And the inadequacies of the mechanical properties have been pointed out from theoretical analysis .(2) On the basis of introducing the working principle, compare the mathematical modeling and mechanical properties of curves of the innovative design of the symmetrical one step force-amplifier crank press to the traditional non-symmetrical layout crank press, and point out the advantages.(3) To get relatively greater stress with the same input torque, two-step and three-step force-amplifier crank press have been designed separately in a symmetrical layout through the method of series combinations with slider-crank mechanism and the toggle mechanism. At the smaller work stroke conditions, the use of tandem combination of force-amplifier significantly reduce the input torque compared to the traditional one-step force-amplifier mechanical press.(4) Appling above-mentioned force-amplifier mechanical press, change the power components from ordinary alternation current motor to sever motor, combined with the use of energy storage technology by“Electronic Flywheel”, making the Mechatronics CNC presses which facilitate the automatic control. CNC press has a more compact structure and high energy efficiency. Moreover its dynamic performance of working part can be improved by designing the angular velocity curve of servo motor.(5) Introduce the basic principles of NC-step press. And overcome the disadvantage that the servo motor torque and output power are too small by innovating new NC-step press combining the force-amplifier.(6) Using MATLAB GUI , set up various types of presses’detailed mathematical model, and design the program interface. Accordance to the tips on the program interface, people just need enter the corresponding parameters of the press you choose. Than you will get the kinematical curves and mechanical properties curves. So it is greatly shortening the development and selection of press cycle.

Related Dissertations

  1. Study on Characteristics of Contiuous Fiber-Reinforced Metal Matrix Composites under Hypervelocity Projectile Impact,TB332
  2. Research of Visual Servoing in 4-DOF Robotic Manipulator,TP242.6
  3. Modeling Analysis and Slip Estimation for Lunar Rovers,TP242
  4. Reaserch on Dynamics for Fast Walking of Biped Robot,TP242.6
  5. Mechanism Design and Kinematic Simulation of a Celiac Invasive Surgical Robot,TP242.3
  6. Analysis and Control of 6-DOF Electrical Driven Parallel Manipulator,TP242.2
  7. The Drying of Tilapia Fillet Using Supercritical Carbon Dioxide,TS254.4
  8. Influence of Nanostructure on Hydrophobic Properties at TiO2 Surface Studied by Molecular Dynamics Simulation,O614.411
  9. Hydrophilic structure of different types of surface -modified polyurethane material and coagulation 12 factor nine peptide fragments,and fibrinogen P1 fragment of computer simulation of the interaction,O631.3
  10. The Dynamic Performance Analysis of Oil Pumping Center and Structural Optimization of Improvement,TE933.1
  11. Influence of Nitrate Concentrations on the Production of N2, N2O, NO, and CO2 by Soil Cores During Anaerobic Incubation,X131.3
  12. Research on Key Technology of Recycling Horizontal Subsea Pipe Conector,TE973
  13. Study on Combustible Gas Leakageage and Diffusion by CFD Simulation,X937
  14. Water in oil emulsion of water hit the harmonic the demulsification dynamics analysis and its mechanism,X703
  15. Traumatic Brain Injury Patients with White Blood Cells in Peripheral Blood CD34~+ Cells and Content Changes,R651.1
  16. Eleventh National Games men's Triple Jump Triple Jump Technique kinematic analysis,G823.4
  17. Alpine Meadow nitrogen mineralization and microbial Mechanism,S812
  18. With backlash compensation function of radial tire building drum,TQ336.1
  19. Virtual Human Motion Simulation,R318.0
  20. Internal power dynamics of district offices,D630
  21. Non- rigid body system kinematics and dynamics of the collision point,O313.3

CLC: > Industrial Technology > Machinery and Instrument Industry > Gas compression and transportation machinery > Compressors, compressor
© 2012 www.DissertationTopic.Net  Mobile