Dissertation > Excellent graduate degree dissertation topics show

Research of the Experimental Modeling for Viscoelastic Composite Beam under Parametric Excitation

Author: WuJian
Tutor: YeMin
School: Zhejiang University
Course: Engineering Mechanics
Keywords: viscoelastic composite beam experimental modeling incremental harmonic balance nonlinearity identification method forced and non-resonant method constitutive relation genetic algorithm
CLC: TB123
Type: Master's thesis
Year: 2011
Downloads: 28
Quote: 0
Read: Download Dissertation

Abstract


This thesis mainly studied the nonlinear mechanical behavior of nano-composited beams which were synthesized in the laboratory. It was difficult to establish the dynamical equation without basic mechanical parameters and constitutive relations. By Incremental Harmonic Balance Nonlinearity Identification (IHBNID) method and parametrically excited dynamic responses, the dynamical equation of the viscoelastic composite beam was established. Then this process was extend to multi-degree-of-freedom system which has periodic responses. At the same time, the dynamic mechanical properties of nano-composited beams were studied by experimental method. The coefficients of models used by now were optimized through genetic algorithm.Firstly, by taking the experimental modeling method and applying to the IHBNID method, the dynamical equation of the viscoelastic composite beam was then built. A series of discussions on the reasonableness of nonlinear term were showed. And different excited frequencies and different materials were considered. Based on numerical simulation, comparisons between theoretical model and experimental system show good agreement in qualitative and quantitative analysis. The theoretical model is applicable for a class of composite materials with different ratio of rutile nanoscaled titania. Frequency scanning data were used for system parametric identification with the dynamical equation. And then the relationships between frequency and parameters and relationships between material and parameters were discussed.Secondly, the IHBNID method excels in the computation accuracy and noise resistance for the single degree of freedom system. So IHBNID method was then extend to multi-degree-of-freedom systems with periodic responses. In order to test the accuracy of IHBNID in multi-degree-of-freedom systems, the method was used to identify the parameters of two degree Van der Pol-Duffing and Mathieu-Duffing equations. Compared with HBNID method, the effectiveness of IHBNID was verified and it applied to multi-degree-of-freedom systems well.Finally, the composite beams researched in this thesis were typical viscoelastic material. To make it easier for structural design and analysis, constitutive relation were developed. On the basis of predecessors’work, forced and non-resonance method was selected to test dynamic mechanical properties of the composite beams. And curve of storage modulus, loss modulus and loss factor as function of the frequency are gained experimentally. Then, an approach based on genetic algorithm is introduced to determine the parameters in a constitutive relation for viscoelastic materials according to the experimentally obtained material mechanical properties. The standard mechanical (STD), the ADF, and the GHM models are parametrically optimized. In addition, according to the optimal result of objective function, the advantages and drawbacks of each model are discussed. This work provides a solid foundation which allows for the analysis of complicated structures involving this damping material.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. The Application of Fuzzy Comprehensive Evaluation Based on Genetic Algorithm in Vocational Evaluation of Classroom Teaching,G712
  3. Study on Taste Characteristic of Taste Peptide Enzymatic Production from Oyster Base on A Neural Network Method,TS254.4
  4. Design and Realization of the Magnetic Antenna in MW and SW Bands Based on Genetic Algorithm,TN820
  5. Citrus Image Segmentation Based on Genetic Algorithm,TP391.41
  6. Research of Scheduling Algorithm Based on Hybrid Adaptive Genetic Algorithm in Computing Grid,TP393.09
  7. Public Transport Optimal Dispatching Based on the Genetic-Newton Algorithm,TP18
  8. Analysis of Concrete Durability under Combined Action of Freeze-thaw Cycles and Chloride Ion Erosion,TU528
  9. BP network optimization based on genetic algorithm optimization of the biodiesel process,TE667
  10. The Research on Texture Synthesis Technology from Cloud Theory & Been Evolution Genetic Algorithm,TP391.41
  11. Research on Clustering Algorithm Based on Genetic Algorithm and Rough Set Theory,TP18
  12. Mining resources based on genetic algorithm optimization model of,O224
  13. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  14. Optimization Study on Gating System and Molding Process Parameters of Injection Mold Based on Simulation,TQ320.662
  15. Research on the Milling Performance and Parameters Optimization with Large Parts of Heavy Machine,TG54
  16. Researches on Improved Genetic Algorithm Base on Reinforcement Learning,TP18
  17. Study on Fuzzy Logic-based License Plate Recognize System,TP391.41
  18. Research on Three-dimensional Surface Splicing Method Based on Genetic Algorithm and the Wavelet Transformation,TP391.41
  19. Research for CBIR Based on Multi-intelligent Algorithms and Image Fusion,TP391.41
  20. The Studies of Bei Piao Wind Farm Generator Gearbox Fault Diagnosis,TH165.3
  21. Optimization of Wireless Sensor Networks Base on Genetic Algorithms,TN929.5

CLC: > Industrial Technology > General industrial technology > Engineering and basic science > Engineering Mechanics > Engineering Vibration
© 2012 www.DissertationTopic.Net  Mobile