Dissertation > Excellent graduate degree dissertation topics show

Direct drive washing machine drum drive control system design and implementation

Author: TongFei
Tutor: GuoZuo；WuYiFei；WuQiang
School: Nanjing University of Technology and Engineering
Course: Control Engineering
Keywords: direct drive drum washing machine Hall position sensor fuzzy control sliding mode variable structure control
CLC: TM925.33
Type: Master's thesis
Year: 2012
Downloads: 15
Quote: 0
Read: Download Dissertation

Abstract


Direct drive drum washing machine has advantages such as small mechanical noise, low system failure rate, low cost and small space occupation. What’s more, having individual design as well as high energy-saving performance, it will certainly become the mainstream products on the market in future.Based on the direct drive drum washing machine, the main work of this paper contains:(1) The overall scheme of direct drive drum washing machine control system is proposed. Direct drive permanent magnet synchronous motor equipped with two hall position sensors is selected as the driving motor; its stator phase current is detected by resistance. DSP MC56F8023 is selected as the main control chip of the whole system according to the requirements of system control performance and current sampling features.(2) In order to solve the problems of in mutual restraint about the accuracy, stability and rapidity of Hall velocity measurement, the improved rotor position and velocity estimation method, improved method-periodic velocity measurement is proposed which improves the stability and accuracy of the estimation results.(3) The hardware circuit of direct drive drum washing machine control system is designed. DSP MC56F8023 is taken as the core chip. Power module, microprocessor and its peripheral interface circuits, smart power module circuit, feedback signal conditioning circuit, communication interface circuit and fault protection circuit are also designed.(4) The software of direct drive drum washing machine control system is designed. The software architecture of control system is designed and the vector control software of direct-drive permanent magnet synchronous motor is also completed.(5) The simulation model of direct-drive permanent magnet synchronous motor control system is constructed. The simulation of its speed loop and current loop control algorithm is finished. For the deficiency of conventional PI and integral separated PI control, one dimensional velocity fuzzy PI and a slip form current controller are separately designed. Slip form variable structure control is more suitable for direct-drive permanent magnet synchronous motor control system.Finally, installed debugging of direct drive drum washing machine is carried out which obtains a better performance in none load tracking and load operating performance, it verifies the feasibility of the drive control scheme designed in the article.

Related Dissertations

  1. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  2. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  3. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  4. Study on Adaptive Fuzzy Control Algorithm and Its Implementation,TP273.4
  5. The Grid-Connected Wind-solar Hybrid Generation System and Maximum Power Point Tracking,TM61
  6. Control System of Rotary Drying for Flake Agricultural Materials,S226.6
  7. Design and Research of a Multi-Use End-Effector for Harvesting Robot,S24
  8. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  9. Saw motor energy-saving controller for tilting sand stone processing DSP-based research and development,TM343
  10. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  11. Design of Intelligent Supervisory Control System for Wastewater Treatment,TP277
  12. Optimal Control of Emulsion System in Cold Rolling,TP273
  13. Research on Grinding and Classification Process Control of Sijiaying Concentrator,TP29-A1
  14. Research on pH Value of the Control Technology for Acid-contained Wastewater Integrated Treatment System in Ningxia Hengli,TP273
  15. Study on Industrial Boiler Water Level Control System,TP273
  16. Intelligent traffic signal control based on fuzzy logic method and simulation research,U491.54
  17. Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52
  18. Fuzzy Control System Design of Transformer Cooler,TP273.4
  19. The Research and Application of PID Parameters Self-tuning,TP273
  20. Study on Autoleveller System of Drawing Frame Based on Adaptive Control and Fuzzy Control,TS103.3
  21. Study on Navigation and Obstacle Avoidance Technique for Auto Guided Vehicle (AGV),TP242

CLC: > Industrial Technology > Electrotechnical > Electrification,electrical energy application > Household appliances and other electrical equipment > Hygiene appliances > Washing machine
© 2012 www.DissertationTopic.Net  Mobile