Dissertation > Excellent graduate degree dissertation topics show

Board-level testing methods based on research and application of boundary scan

Author: ZhangLe
Tutor: QiGuoQing
School: Nanjing University of Technology and Engineering
Course: Control Engineering
Keywords: testability design boundary scan fault diagnosis coverage rage
CLC: TN79
Type: Master's thesis
Year: 2012
Downloads: 70
Quote: 0
Read: Download Dissertation

Abstract


This paper focuses on the research of the application of boundary scan method in a board testing of the digital system. With the analysis of the measurability in digital circuit, the paper discusses the advantages of improving the electric testability design of the boundary scan method, gives the specific process of the fault detection and diagnosis in circuit test with the scan testing method. Furthermore, this paper analyzes and researches the scanning unit in chip as well as the TAP controller in scan testing, registers, BSDL files and the common instructions in scan testing. Also, the paper combines the research of boundary scan method, puts forward several collocation method in bus testing, provides the actual application of the boundary scan method in a board testing and has obtained the ideal reports of the testing coverage.First, through the analysis of the electric testability and the SCOAP regulation measure, the paper illustrates the controllability and visible algorithm of the network in the electric board test. On the premise of the testability measure, it proposes the better method of the electric testability design, namely the boundary scanning test method of this paper, analyzes the advantages in the board scanning test of the fault detection.Second, by the research of boundary scanning technology, this paper simulates the signal loading of the scanning unit in test and collecting method, the working condition of the TAP controller during the testing and the related operations of registers. Also, the relevant mathematics models of the basic fault types in board test are established, the various kinds of the fault diagnosis and the testing process the boundary scanning in board test are analyzed in detail. In addition, the paper has studied the IC interconnect test and logical test between IC in the boards.Finally, combined with the earlier testability design and the theory research between circuit board test, the paper establishes the demo board as a model and has finished a test program with the relating information, and then spreads the actual engineering test, detects the effect of the common fault in the model scanning test which based on some artificial sets. In the end, the whole coverage rate between circuit board test are supplied.

Related Dissertations

  1. Design and Development of Application Programme for Fault Analyzer Based on Wince Platform,TP311.52
  2. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  3. Fault Diagnosis Method Based on Support Vector Machine,TP18
  4. Fault Diagnosis Research on Three-Tank System,TP277
  5. Research on the Key Technology of Waterborne Transport Security System,U698
  6. Fault Diagnosis Method Study of Hydraulic System of Concrete Pump,TU646
  7. Stage Fault Diagnosis Based on Data Fusion,TP18
  8. Research of Fault Diagnosis Method of Analog Circuit Based on Improved Support Vector Machines,TN710
  9. Design and Simulation on Topology Reconstruction Scheme in Ad Hoc Networks,TN929.5
  10. Real-time Pressure Monitoring and Fault Diagnosis of High-pressure Spray Descaling System,TG333
  11. The Method of Transient Modeling and Parameter Identification and Its Application in Rotating Machine Fault Diagnosis,TH165.3
  12. GPRS-based transformer fault diagnosis system,TM407
  13. Research and Application of the Attribute Reduction Algorithm Based on Improved Discernibility Matrix,TP18
  14. Fault Diagnosis Method and Application Based on Observer,TP212
  15. Study on Intelligent Diagnosis of Measuring Radar,TN957
  16. Life greased ball bearing noise test technique,TH133.3
  17. Multi-chip Digital Test Based on the BSC of FPGA,TN407
  18. ALU-8521LS generator regulator fault detection system design and implementation,TM423
  19. Uncertain Information Fusion Method Based on Random Sets and Application on Fault Diagnosis of Wind Turbine Generators,TM315
  20. The Fault Diagnosis of Wind Turbine Gearbox Based on LSSVM of Parameter Optimization and Improved PSO,TM315
  21. A Study on Fault Diagnosis and Location of Partial Discharge Fault of Oil-immersed Transformer,TM407

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Basic electronic circuits > Digital circuits
© 2012 www.DissertationTopic.Net  Mobile