Dissertation > Excellent graduate degree dissertation topics show

Preliminary Study on the Characteristics of HPM Beat Waves and Their Effects on Objects

Author: WuDaPeng
Tutor: ShuTing；LiGuoLin
School: National University of Defense Science and Technology
Course: Electronic Science and Technology
Keywords: HPM beat wave object-coupling injection experiment
CLC: TN015
Type: Master's thesis
Year: 2011
Downloads: 26
Quote: 0
Read: Download Dissertation

Abstract


According to existing theoretical and experimental researches, high power microwave (HPM) of low frequency has its merits in applications. However, larger radiation system is necessary for microwaves of lower frequencies to get enough far field gain. HPM beat wave, which behaves as high frequency wave modulated in amplitude by low frequency, can be radiated with antenna system of smaller size. And with proper nonlinear effects, it is possible to produce wave of low frequency related to beat frequency. As a result, HPM beat waves possess the advantages of low-frequency and high-frequency HPMs. In this thesis, some theoretical investigations on waveform and spectrum of some real HPMs and their beat waves, and the response HPM beat wave in linear and nonlinear coupling conditions as well as some experiments are carried out to obtain some insights into HPM beat waves and their effects on objects. The detailed research contents and results are listed below.Firstly, investigations are carried out on the characteristics of HPMs and their beat waves. HPMs actually do not work at a fixed frequency. Their phase shifts between pulses, and the waveforms are very complicated. If the frequency of each wave is fixed, the peak power of HPM beat wave is influenced by time synchronization and relative electric field strength. Time synchronization and phase differences must be precisely controlled when beat wave is emitted by an antenna array.Secondly, HPM beat wave coupling is mixed by linear and nonlinear processes which are investigated in this thesis. The electric field strength coupling into the cavity of HPM beat waves which are not cut off by the slot can be two orders of magnitude larger than that of single waves which are cut off by the slot. Quantitative results are got on the strength of low frequency waves produced in certain nonlinear processes.Finally, injection experiment is carried out on pre-amplifier circuits. Results reveal that, with the same pulse width and in similar frequency domain, the malfunction threshold power of beat wave is about 3 dB lower than that of a single wave. In beat wave case, the threshold is in Gaussian distribution and its variance is small. Due to the nonlinear effect of the pre-amplifier, a wave with beat frequency is generated when the beat wave is transmitted to the next circuit component. The further analysis of the general effects of the HPM beat wave reveals that, with equal peak power, the general effective power into the objects for HPM beat wave is about 10.9 dB and 50.9 dB higher than the wave with beat frequency in the considered two conditions separately.

Related Dissertations

  1. Empirical Analysis of the Impact of Shenzhen Metro on the Price of Adjacent Real Estates Based on HEDONIC Model,F293.35
  2. Investigation of HPM Air Breakdown Near Output Window of the Antenna,TN822
  3. Researching Kelly Machine & Steady with Mill in the Kelly of Manufacture,TG52
  4. History and Teaching of the Ellipse,G633.6
  5. Low-noise amplifier prospective study of the effects of electromagnetic interference,TN722.3
  6. Digital circuit high power microwave (HPM) effects of,TN79
  7. Denisov Radiation Research and circular polarization waveguide technology,TN624
  8. Response of Passive and Active Devices in Communication System Illuminated by High Power Electromagnetic Pulse,TN03
  9. Two Kinds of Nonlinear Partial Differential Equation Solution and Its Application,O175.29
  10. Millimeter wave technology theory variable modulus,TN925.4
  11. Research on the House Price and Its Determinations in the North Area of Xi’an Based on HPM,F224
  12. Influence of the High Pressure Microfluidization on the Functional Properties of Wave Starch and Its Mechanism Study,TS231
  13. High-power magnetically insulated transmission line oscillator,TN752
  14. High power microwave circular waveguide mode converter,TN814
  15. Study on Bent Circular Waveguides TM0.1-TE11 Mode Converter,TN814
  16. A Virtual Cathode Oscillator with an Axially Extracted TE10 or TE11 Mode,TN752
  17. Investigation of Problems Related to Power Measurement of High Power Microwaves Using Far-field Method,TM933.3
  18. Study on the Expression of GSH Modulates ICAM-1 in Rat Liver after HPM Irradiation and the Protective Effects of GSH on Liver Injury,R594.8
  19. The media interface HPM breakdown and traveling-wave ring,TN124
  20. High - power pulsed microwave power frequency meter,TM935.13
  21. Reflector relativistic diffraction radiation oscillator,TN752

CLC: > Industrial Technology > Radio electronics, telecommunications technology > General issues > Basic theory > Microwave and UHF
© 2012 www.DissertationTopic.Net  Mobile